PRIMACREATOR MK8 BRASS NOZZLE 0.4 MM - 4 PCS

Premium nozzles

PrimaCreator's premium nozzles are a series of replacement nozzles that can make more of a difference in the outcome than you might think. Having a high quality nozzle is like having a sharp pencil, you need it to get a great print.

High quality

All PrimaCreator nozzles are made from the highest quality brass or steel (depending on type) and are completed in a state-of-the-art factory. All nozzles are produced with a tolerance of less than ±0.01mm. This means that the filament will have a very smooth and clear surface when extruding, which, of course, results in better prints.

• After this process, the material passes through an ultrasonic cleaning bath and is subsequently cleaned again and protected from surface oxidation.
• The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
• The process of removing sharp edges from nozzles is a very important step as it makes up a large part of the result. If too many sharp edges remain on the nozzle, the nozzle will be more prone to clogging. So it is essential that the nozzle is very smooth and clean before being used. In each batch, a few nozzles are selected and cut in half to ensure that every specification is met and the surface is in perfect condition.
• The nozzles are then checked for the last time and individually packaged in a protective box, ready to be shipped.
• 0 = 0.20mm
• 3 = 0.40mm
• 4 = 0.60mm
• 5 = 0.80mm

Recommendations

For best results and optimal print quality, we strongly recommend that you re-level the build plate after using a new nozzle. Please note that a PrimaCreator nozzle may be compatible with your printer, but the distance between the nozzle and the print bed needs to be adjusted.

The process

• The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, an optical inspection is first carried out on the material that will be used for each batch of nozzles. Then it's time to secure the material, in other words, to turn it into a long rod. In our process this is only done once, in many other (cheaper) cases, this process has to be repeated several times, often up to 3-4 times and yet the same results are not achieved.