3D–FINISH Resin Coating for 3D Prints

Post-print coating for smoothing and finishing 3D Prints. Guarantees a coating shiny, homogeneous and resistant already with the first application.

It can be colored with coloring pastes or metallic powders or used transparent.

Excellent adhesion and reinforcement on PLA, LAYWOOD, ABS.

• Fragrance free;
• Quick ;
• Resistant;
• Sandable;
• Glossy;
• High UV resistance,
• Excellent Mechanical Strength,

Applied to any print, it makes the surface treated glossy, smooth and impact resistant.

Specially developed for application in the 3D sector, does not drip and does not cover small details, faithfully respecting all forms of the press.

• Eliminate the irregularities between the different layers;
• Glossy;
• Strengthens the mechanical resistance of the print;
• Sandable and paintable.

+ Employment Ratio 100:45;

+ For an area of 200 cm2, only 25g are needed

Curing speed

At a temperature of 20°C it is solid in 3 hours

At a temperature of 30°C it is solid in 2 hours

The curing rate can be further accelerated by keeping the piece near a heat source.

Viscosity and processing times

Viscosity at 900 cps (25°C)

Workability time (15g) at 20 min (20°C)

Workability time (15g) at 10 min (30°C)

Fast and Effective, it is proposed as an Easy Application solution to accelerate the production of finished products through 3D printing, increasing its aesthetic homogeneity and impact resistance.

The high mechanical resistance also makes it ideal as glue between prints or for the repair of artefacts damaged 3D.