PRIMACREATOR CMYK PIGMENT SET (4 X 30 ML)

Create your own color!

The PrimaCreator CMYK pigment set is intended for use with any brand of clear or white resin, but for best effect we recommend PrimaCreator or CopyMaster3D. It is used to create customized colors based on individual needs. These pigment dispersions are designed to work with 3D printing applications where UV light is used to cure resin layer by layer.

Highlights

• Let your creativity flow and create your own colors.
• Perfect for mixing with clear or white resin.
• Any color combination possible
  
  

  Shake well before each use. Slowly drip the pigment solution into the resin of your choice and mix well until you reach your desired color. To get the same color density as our regular pigmented resin, you will need to add approximately 4ml of pigment dispersion. Make sure you don't add too much, adding too much pigment can result in slower curing times and potentially inhibit curing completely.

  The pigment solution can be added to our white or clear resin depending on the finish you desire. When added to the white base resin you will get a matte finish. If you add it to clear resin you will get a clear look. The more pigment you add, the more solid the color will become.

  Please be extremely careful when handling the pigments as they will stain very easily, use gloves to avoid staining your skin.

  Pigment dispersions are safe to use, but it is always recommended that you read and understand the technical and safety information before use.