ANKER MAKE M5

Reduce printing times by 69%

Testing was conducted by AnkerMake in September 2022 using the AnkerMake FDM 3D printer at an operating speed of 250 mm/s.

Reduce printing times by 75%

Testing was conducted by AnkerMake in September 2022 using the AnkerMake FDM 3D printer at an operating speed of 250 mm/s.

Driven by PowerBoost™

You'll get high-speed precision thanks to PowerBoost™ , which optimizes energy with its Y-axis drive system. PowerBoost™ uses a powerful stepper motor, a dual-belt drive shaft and a stabilized motion algorithm to deliver plenty of extra power for high-speed printing.

• Standard speed: 250 mm/s

• Accelerated speed: up to 2,500 mm/s²

3.1X extrusion

Higher multi-stage gear ratio

The basis of the high-speed press begins with the improved multi-stage gear system with a reduction ratio of 9.37 that delivers 0.8 N·m of torque. The strong twist puts pressure on the melting chamber to make extrusion faster.

1.5X fusion

Larger heating block

The 60W heating rod quickly raises the nozzle temperature up to 200°C (392°F) with 1.5x more efficiency than other printers. The heat ensures that the filament discharges smoothly during fast printing at 250 mm/s.

1.3X cooling

More air inlet volume

The dual-cooling system uses a pair of fans that push out 1.3 times the volume of air output from other printers at full speed. Cooling prevents stringing and helps cool the model quickly.

The built-in smart camera

• Full HD 1080p resolution

• Real-time monitoring (up to 720p)

• Time-lapse videos (1080p)

• Frame rate: 30 fps

AI camera recognition system

The AnkerMake slicer analyzes the model's 3D data before printing begins, then the AI ​​recognition system uses the powerful XBurst CPU to continuously check and compare throughout the entire process.

Error detected, immediate warning

Protect yourself from

• Spaghetti pies
• Staggered layers
• Failure of the first layer to adhere
• Nozzle blockage

Monitor your prints 24/7

Check in whenever you want with real-time viewing via the AnkerMake app.

Even if it's 3 a.m., you can monitor the printing progress with adaptive light-sensing algorithms. Plus, timelapses look cooler after dark.

Share your timelapses

Feel good about your creations and show them off with timelapses that are easy to share on social media.

AnkerMake Slicer

AnkerMake application

Alexa and Google Assistant

7x7 automatic leveling

Give precision to your prints with 7x7 automatic leveling. Advanced algorithms calculate a virtual height map to initiate printing correctly. The only time you need to make changes manually is when upgrading something major like the nozzle or PEI soft magnetic steel plate.

The integrated design keeps your workspace tidy

Avoid tangled cables and multiple stray devices with 1 clean, consistent design. The M5 consists of the base and gantry frame, and the Z-axis design hides any dangling cables from view.

Foldable and scratch-resistant plates

No matter how large or small, removing a print is now easy with just a slight bend of the scratch-resistant PEI soft magnetic steel plate as it cools. And thanks to the magnetic heatbed design, you can easily remove and replace the press sheet.

Receive print status notifications

You can choose how to find out when something changes with your 3D printing. See an LED light from 10 meters away, hear a beep or receive an alert on the app.

Print large models with high-speed efficiency

Enlarge your prints to a massive 235x235x250 mm³ and watch the M5 handle the job fast at 5X speed.

The 4.3" touch screen makes printing easy

Simplify common tasks with a smart, colorful LCD touchscreen. You can also switch to night mode to help your eyes when working late.

Save material with instant alerts

Never waste a moment or gram of filament again with low filament and error alerts. The M5 scans before and during printing to ensure your print is exactly to your specifications.