RPETG ECOSMART 1kg - Printologist

1. Ecological

Thanks to its RPETG-based granules that are up to 100% recycled and recyclable, cardboard reel and sealed in bamboo bioplastic, it has everything you need for a zero-impact product!

2. Economical

In a future that opens up 3D printing to mass consumption, the prerogative is to make the raw material accessible to everyone, which is why ECOSMART is the most economical material on the market.

3. Fun

We print for fun, which is why ECOSMART prints as easily as classic PETG. You'll get temperature- and shock-resistant models suitable for all uses.

It does not require a closed chamber, is non-toxic and low shrinkage.

Print Settings

Printing recommendations

1. For a perfect first layer, lower the speed, turn off the fan and slightly increase the flow.
2. This material has the maximum aesthetic yield at low extrusion (230°), while the mechanical potential increases at high temperatures (245°) and moderate printing speed, the fan will always remain off.
3. It is always recommended to heat the hot plate to 70 - 80° and use hairspray.

Recommendations

Ecosmart is RPETG, so it requires previous PETG printing experience. While it's not difficult to print, some 3D printing know-how is required, so we recommend newbies printing a material other than PLA for the first time start with a small batch to test. Colors may vary slightly from the photos, depending on the type of recycled material.