Siraya Tech ABS-CF Core 1.75mm 1kg

The filament Siraya Tech ABS-CF Core It is designed for those seeking maximum rigidity and reliability in industrial and engineering applications. Thanks to revolutionary core-shell technology, this ABS reinforced with 20% carbon fiber concentrated in the core ensures an extremely rigid and stable structure, with extraordinary resistance to both impact and high temperatures.

Compared to traditional reinforced ABS, the Core version features improved interlayer adhesion (Z-axis), better dimensional accuracy, and significantly reduced nozzle wear, thanks to less exposed fibers on the filament surface. The result is warp-free prints with high-quality surfaces and mechanical properties suitable for automation, automotive, drone, tooling, mechanical parts, functional prototypes, and objects subjected to continuous stress.

One of the main advantages is the ability to print at high speeds, up to 200 mm/s, without compromising the quality or strength of the final part. Thermal resistance up to 90°C (HDT) makes this filament ideal for use under the hood of cars or in hot industrial environments.

Technical specifications

• Filament diameter: 1.75mm
• Composition: ABS (Acrylonitrile Butadiene Styrene) + 20% carbon fiber core-shell
• Net weight: 1kg
• Recommended printing temperature: 250–280°C
• Heated bed temperature: 100–110°C
• Recommended room temperature: optional, 60–80°C for best performance on large objects
• Recommended print speed: 30–200mm/s
• Recommended nozzle: hardened steel, diameter from 0.4 to 1.0 mm
• Retraction: 1–3mm, 1,800–3,600mm/min
• Density: 1.09g/cm³
• HDT: 83°C (1.8MPa), 90°C (0.45MPa)
• Tensile strength (XY): up to 49.9MPa
• Elastic modulus (Young): 4.810MPa
• Flexural strength: 81.1MPa
• Flexural modulus: 4,450MPa
• Elongation at break: 1.5%
• Charpy impact resistance: 8.2kJ/m²
• Surface and quality: opaque, no warping deformation, excellent layer adhesion
• Odor: low, reduced VOC emissions
• Conservation: dry; if wet, dry at 60–70°C for 4–6h
• Compatibility: FDM with direct drive extruder and closed chamber preferred

Directions for use

• Use PEI plate or similar with glue for maximum adhesion.
• Always prefer hardened steel nozzle for long life.
• Ideal for structural parts, functional prototypes and components subjected to high stress.