Enables connection of M300 RTK with Manifold 2 and provides adapter interfaces for on-board computing platforms.
Compatible with M300 RTK and Manifold 2.
Converts the interfaces on the M300 RTK OSDK to standard interfaces such as USB Type-A, UART serial port, and XT30 power output, to enable connection with onboard computing platforms.
It can be used with single gimbal upward to meet the needs of more scenarios.
When mounted on the M300 RTK, the module can be stored in the secure carrying case while attached to the drone, ensuring easier storage.
Suggestions
This module converts the OSDK M300 RTK interfaces to standard interfaces such as USB Type-A, UART serial ports, and XT30 power sockets, to enable connectivity with onboard computing platforms. The module is not designed with dust or waterproof features.
Please assemble according to the instructions in the user manual before use. For more information, visit https://developer.dji.com.
Bracket A (upper) x 2
Bracket B (left) x 1
C-Bracket (right) x 1
Bracket D (reinforcing rib) x 3
Bracket connection block x 4
OSDK adapter plate module x 1
USB cable (with two type-A ports) x 1
XT30 power cable x 1
Wire clips x 3
Foot pads x 3
Hand screws x 5
Screw A (M1.6) x 15
Screw B (M2.0) x 5
Screw C (M3.0) x 5
Screw D (M1.6 step) x 3
Screwdriver kit x 1
As-assembled size: 200 x 120 x 40 mm
M300 RTK Matrix
Manifold 2
