BASF ULTRAFUSE PPSU - NATURAL - 1.75MM - 750G

Ultrafuse PPSU was developed specifically for FFF printing based on BASF’s advanced Ultrason materials. Ultrason pellets are amorphous thermoplastic materials derived from polyethersulfone (PESU), polysulfone (PSU) and polyphenylsulfone (PPSU) and ensure very high thermal resistance.

Characteristics:

• Intrinsically fire retardant
• Short-term temperature resistance up to 220 °C
• Resistant to long-term service temperatures up to 180°C
• Oil resistant, even at temperatures up to 170°C
• Fuel and fluorine resistant

PPSU Ultrafuse

Thanks to the broad spectrum of material performance benefits, Ultrafuse PPSU can be successfully used in applications where other plastics, such as polyamide, polycarbonate, polyoxymethylene and polyalkylene terephthalates, fail to meet the performance specifications. Due to its inherent flame retardant properties, it is a particularly suitable material for the aerospace industry.

Tips and Tricks

• Nozzle temp; 390 – 410°C
• Nozzle; 0.4mm
• Print speed; 25 – 50 mm/sec
• Bed temp; 220°C
• Bed modification; Glass, reinforced sheet metal

Material properties

• Tensile strength (MPa): 49.0 (ZX), 74.5 (XY)
• Flexural modulus (MPa): 1700 (ZX), 1910 (XZ), 1940 (XY)
• Elongation at break: 2.9% (ZX), 7.3% (XY)
• Izod impact resistance with notch (kJ/m2): 5.3 (ZX), 15.8 (XZ), 13.7 (XY)
• Unnotched Izod impact strength (kJ/m2): 21.0 (ZX), no fracture (XZ), no fracture (XY)
• HDT at 0.45 MPa: 215 oC

BASF Quality Control

The best available raw materials are selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery ensures a truly consistent filament, even between colors and batches. It will perform as expected every time.

All BASF products are 100% traceable back to the source.