BASF ULTRAFUSE PLA PRO1

UltraFuse PLA PRO1

Ultrafuse PLA PRO1 is BASF's high-quality, durable PLA which means: speed, strength, versatility, consistency!

Ultrafuse PLA PRO1 is developed as a high-speed engineering thermoplastic that prints as easily as PLA, at speeds previously considered unusable. Yet it maintains far better mechanical properties, even surpassing printed ABS objects. Something that demanding users have always had to compromise on before Ultrafuse PLA PRO1.

Characteristics :

• Speed: Reduce printing times by 30% – 80%
• Strength: Overall excels beyond molded ABS in terms of mechanical properties
• Versatility: A filament that can be adjusted to achieve incredible speeds and excellent surface finish
• Consistency: Truly consistent filament, even across colors and batches, will always perform as expected

Optimize printing

By varying print settings, users can fine-tune speed, strength, surface quality, or a combination of these qualities beyond the performance levels of traditional filaments. When you find yourself in an environment that requires reliable performance print after print, look no further than increasing your productivity with Ultrafuse® PLA PRO1. Increasing the speed can save you at least 30%* in print time. To achieve this high speed, we recommend setting your printer in the temperature range of 220°C to 230°C*. Super-fast printing can impact surface quality. Ultrafuse PLA PRO1 has strong layer adhesion, making prints much more durable, thus increasing functionality.

TIPS AND TRICKS

Quick Print Settings:

• Printing temperature: 220 °C ± 10 °C
• Printing speed: 120-150mm/s
• Filling density: ≥ 20%
• Adhesion to the bed: clean the glass
• Fan speed: 100%
• Top thickness: 1.2mm
• Layer height: 0.1mm
• Bed temperature: 60°C or unheated bed with tape/glue

Strong settings:

• Printing temperature: 220 °C ± 10 °C
• Printing speed: 40 – 70 mm/s
• Filling density: ≥ 20% (higher = stronger)
• Adhesion to the bed: clean the glass
• Fan speed: 0%
• Top thickness: 1.2mm
• Layer height: ≤ 0.06mm
• Bed temperature: 60°C or unheated bed with tape/glue

Aesthetic settings:

• Printing temperature: 220 °C ± 10 °C
• Printing speed: ≤ 70 mm/s
• Filling density: ≥ 20%
• Adhesion to the bed: clean the glass
• Fan speed: 100%
• Top thickness: 1.2mm
• Layer height: ≤ 0.1
• Bed temperature: 60°C or unheated bed with tape/glue

BASF Quality Control

The best available raw materials are selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery ensures a truly consistent filament, even between colors and batches. It will perform as expected every time.

All BASF products are 100% traceable back to the source.