PRIMASELECT NYLONPOWER PA 6/66 - 500G

Prima SELECT NylonPower PA 6/66 – Buy PA6/66 3D printer filament

NylonPower PA 6/66 from PrimaCreator is a special blend of 3D printer copolymers with polyamide filament that takes full advantage of the strengths of both PA 6 and PA66. The combination of these two types of polyamides makes our nylon very easy to 3D print. Normally nylon (PA) is very difficult to 3D print. With regular nylon 3D printer filaments, you will have a hard time getting them to stick to the build plate. With NylonPower you can use lower 3D printing temperatures than you normally would with Nylon. Use this material in the most common FFF/FDM 3D printers.

Main material properties of NylonPower PA6/66:

• Perfect blend of PA6 and PA66
• High chemical and thermal resistance
• Less warping than regular nylon makes 3D printing easier
• Excellent layer adhesion creates durable 3D printed parts

How to best 3D print nylon filament

When 3D printing with nylon, you need to do so on a heated print bed. For better adhesion we recommend using Magigoo PA. The temperature should be set to 60-80°C.

Nylon PA6/66 a powerful 3D printing filament

Nylon has strong mechanical strength and deforms less. It is difficult to peel off or break. Furthermore, nylon is also one of the best materials in terms of impact resistance.

Special properties of nylon material and tips for its processing

Nylon is very hydroscopic. This means it absorbs liquids, this could be an advantage if you want to dye your filament. It also means that it is important to dry the nylon before use. You can set the oven to 70-80°C and leave it there for 4-8 hours. The longer you leave it, the drier it will be. This will also be reflected in the final print result, both from a visual and performance point of view.