POLYMAKER NYLON COPA 6/6-6 750gr

PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness and heat resistance up to 180°C.

Characteristics:

• High heat resistance
• Sturdy material
• High tensile strength

Polyamide

PolyMide™ is a family of nylon/polyamide based filaments. Made with Polymaker’s Warp-Free™ technology, PolyMide™ filaments offer inherent nylon engineering properties and ease of printing.

CoPA

PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness and heat resistance up to 180°C.

Recommended settings

• Nozzle temperature: 250˚C – 270˚C
• Printing speed: 30mm/s – 60mm/s
• Bed temperature: 25˚C – 50˚C
• Bed surface: glass with glue
• Cooling fan: off

Note: It is highly recommended to use PolyBox™ when printing with PolyMide™ CoPA and store it in the resealable bag. To ensure good heat resistance of the printed part, it is recommended to anneal the 3D printed model in PolyMide™ CoPA. Annealing settings: 80˚C for 6 hours

When used extensively, PolyMide CoPA can be abrasive to brass nozzles. When using PolyMide CoPA, it is recommended to switch to a wear resistant nozzle such as a hardened steel nozzle.