Elegoo - Mercury Plus V3.0 - Station de lavage et de traitement auto 2 en 1

Increased dimensions for greater capacity

Upgrade to the Mercury Plus V3.0 for increased capacity and efficiency. With a 7.5-liter cleaning capacity (114% more than the previous version) and a 460% larger curing surface, it's perfect for easily processing large models or multiple prints at once.

Double cleaning option

Depending on your needs, you can choose between two practical cleaning modes:

•  Basket Mode: Remove your model from the print bed and place it directly into the basket. Ideal for quick clean-up, this mode can accommodate models measuring up to 230mm x 135mm x 260mm.
•  Suspended mode: Attach the print bed to the adjustable supports and start cleaning. These brackets, which can accommodate up to 10-inch plates, ensure a perfect fit. This mode is suitable for models with a maximum size of 214 mm x 135 mm x 180 mm.

Deep cleaning

Thanks to the new generation POM bearing, the Mercury Plus V3.0 offers extremely smooth rotation and even more efficient water agitation. This way your models are cleaned more effectively and residual resin disappears completely.

Powerful 360° tempering on the entire perimeter

Thanks to the 360° rotating plate and the 24 UV lamps of 405 nm, this machine guarantees a fast and uniform polymerization, perfect for highlighting every detail of your models. Thanks to the light columns and the reflective mirrors positioned under the transparent upper part, the light is distributed optimally. This will result in complete hardening from top to bottom and excellent surface quality.

Simple operation, easy to use

The machine is equipped with a very intuitive touch panel that allows you to easily control the settings and the remaining time. You can adjust the washing and curing time, up to a maximum of 30 minutes, to obtain perfect results every time.

UV protective cover

The machine's UV cover blocks 99.9% of ultraviolet rays, protecting your eyes while ensuring optimal curing. For added safety, the microswitch automatically stops the process if the cover is removed, ensuring convenient and safe use.

Excellent compatibility

This machine is compatible with most LCD, DLP and SLA 3D printers, making it an excellent choice for simplifying and streamlining post-processing of your prints.
It is specially designed for Elegoo resin 3D printers. If you are using Jupiter series, you will need to remove the print bed to clean it. For other models, just check the "MAX WASHING VOLUME" section in the specifications to see if bed removal is required based on your print height.

Box contents

• 1x Mercury Plus V3.0
• 1x Cleaning Tray
• 1x Drying turntable
• 1x Cleaning basket
• 2x adjustable brackets
• 1x User Manual
• 1x Tool Kit
• 1x Power cable