• Build Volume: 620×620×620 mm (single extrusion) / 565×620×620 mm (dual extrusion)
• Print Speed: up to 300 mm/s stable — 5 times faster than the standard D600 Pro3 model
• Nozzle Temperature: up to 420°C for advanced technical materials
• Bed Temperature: up to 120°C
• Heated Chamber: up to 80°C with double-layer insulation cotton
• Hotend Flow Rate: record-breaking 90 mm³/s
• Firmware: Klipper optimized for high speed

The leveling system uses Eddy current technology with a precision of 0.001 mm, improving calibration by 99% compared to traditional methods, completing the entire procedure in just 60 seconds. XY calibration is done via HD macro camera with automatic AI visual recognition at 0.02 mm precision, while on the Z-axis there are dual photoelectric sensors at 0.005 mm.

The chamber reaches 80°C thanks to a double layer of insulation cotton, essential for printing technical materials like ABS, PC, Nylon, PA-CF on large formats without warping. The exclusive Magic Box for the Z-axis technology compensates for thermal expansion of the structure in real-time, eliminating misalignments between layers even at high temperatures.

The four independent Z-motors automatically correct the tilt of the platform at each corner, ensuring perfect parallelism and maximum first-layer adhesion. This system, combined with heavy-duty linear rails and servo motors, ensures smooth and precise movements even at high speeds over distances exceeding 1000 mm.

The D600 Pro3 HS supports a wide range of technical and engineering filaments:

• PLA, ABS, ASA, PETG, PP, TPU
• PC, Nylon, ABS-CF, PC-CF
• PET-CF, PET-GF, UltraPA-CF, PPS-CF
• Filament diameter: 1.75 mm (open system)
• Integrated filament dryer with 0–70°C adjustment

The safety interlock door system automatically stops printing when opened, with encrypted operational logs for corporate environments. The air filtration system integrates a dual HEPA + activated carbon filter to eliminate fine particles and VOCs.