Buse en laiton CreatBot 1,75 mm 0,4 mm - 1 pcs

• High quality nozzle
• State-of-the-art factory
• Tolerance is less than ± 0.01mm

Premium Nozzles

PrimaCreator Premium Nozzles are a series of replacement nozzles that can make more difference to your results than you might think. Having a high quality nozzle is like having a sharpened pencil, it helps you get a great print.

High quality

All PrimaCreator nozzles are made of high quality brass or steel (depending on the type) and are completed in a state of the art factory. All nozzles are made with a tolerance of less than ± 0.01mm. This means that your filament will have a very smooth and clear surface during extrusion, which of course results in better prints.

• After this process, the material is subjected to an ultrasonic cleaning bath and then cleaned again and protected from surface oxidation.
• The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
• The process of removing sharp edges from the nozzles is a very important step as it is an important part of the result. If there are too many sharp edges left on the nozzle, it will be more prone to clogging. So it is essential that the nozzle is very smooth and clean before being used. In each batch a few nozzles are selected and cut in half to ensure that all specifications are met and the surface is in perfect condition.
• The nozzles are then checked one last time and individually packed in a protective box, ready for shipment.
• 0 = 0.20 mm
• 3 = 0.40 mm
• 4 = 0.60 mm
• 5 = 0.80 mm

Recommendations

For best results and print quality, we strongly recommend re-leveling the build plate after changing nozzles. Note that a PrimaCreator nozzle may be compatible with your printer, but the distance between the nozzle and the build plate needs to be adjusted.

The process

The manufacturing process of a PrimaCreator nozzle starts with a selected high-quality material. When the material reaches the factory, an optical inspection is first performed on the material that will be used for each batch of nozzles. Then it is time to block the material, in other words, to make it into a long rod. In our process this is done only once, in many other (cheaper) cases, this process has to be repeated several times, often up to 3-4 times and still the same results are not achieved.