UniFormation - Water Washable Resin - Light Grey - 1.2 kg

Practical and Economical

Instead of using cleaning products like alcohol, with this Uniformation resin, you just need to immerse your printed parts in water. It's easy, economical, and fast to clean your 3D printed creations.

Minimal Shrinkage and High Precision

Thanks to its low shrinkage, this Uniformation UV resin captures all the details of prototypes during photopolymerization, thus offering high-resolution prints.

Faster Curing Times and Higher Printing Speed

Thanks to its low viscosity and optimal fluidity, this Uniformation 3D printer resin absorbs UV light more effectively. This reduces curing times, speeds up printing, and saves you time.

Wide Compatibility

This Uniformation resin is compatible with all DLP/LCD/SLA 3D printers on the market, ensuring a high-level printing experience and impeccable results.

Secure and Robust Packaging Bottle

For the Uniformation GK3 3D printer, the resin is designed to be easily added to the printer tank via a needle. The resin is contained in a robust bottle to prevent leaks and can be refilled through the neck.

PHYSICAL-CHEMICAL PROPERTIES

• Physical State: Low-viscosity liquid
• Viscosity (at 25°C): 260 ± 20 mPa·s
• Boiling Point: 100 °C
• Melting Point: < 0 °C
• Flash Point: 105 °C (Closed-cup test)
• Odor: Slight characteristic resin odor
• Flammability / Explosion Risk: Non-flammable
• Volatile and Carcinogenic Substances: Absent / Not detected
• Storage Temperature: 8 °C – 28 °C (away from direct light and UV sources)
• Shelf Life: 12 Months (in sealed packaging)
• Chemical Incompatibility: Reacts with strong oxidizers, strong acids, and strong bases
• Main Source: MSDS Safety Data Sheet (LST250798135MR)

3. CHEMICAL COMPOSITION

• Main Source: MSDS Safety Data Sheet (LST250798135MR)

4. ENVIRONMENTAL AND SAFETY COMPLIANCE (RoHS)

• Reference Regulation: RoHS Directive 2011/65/EU and (EU) 2015/863
• Certification Result: COMPLIANT (PASS)
• Cadmium (Cd): Not Detected (N.D. < 2 mg/kg | Limit: 100 mg/kg)
• Lead (Pb): Not Detected (N.D. < 2 mg/kg | Limit: 1000 mg/kg)
• Mercury (Hg): Not Detected (N.D. < 2 mg/kg | Limit: 1000 mg/kg)
• Hexavalent Chromium (Cr VI): Not Detected (N.D. < 8 mg/kg | Limit: 1000 mg/kg)
• Polybrominated Biphenyls (PBBs): Not Detected (N.D. < 5 mg/kg | Limit: 1000 mg/kg)
• Polybrominated Diphenyl Ethers (PBDEs): Not Detected (N.D. < 5 mg/kg | Limit: 1000 mg/kg)
• Phthalates (DBP, BBP, DEHP, DIBP): Not Detected (N.D. < 30 mg/kg each | Limit: 1000 mg/kg)
• Main Source: RoHS Test Report (CBT250425133RR)

5. OPERATING INSTRUCTIONS, HANDLING, AND TRANSPORT

• Protective Equipment (PPE): Use in well-ventilated areas. Disposable nitrile gloves or finger cots and protective eyewear are recommended.
• Firefighting Measures: Use foam or CO2 (carbon snow) extinguishers. At high temperatures, uncontrolled polymerization can cause containers to rupture or explode.
• Accidental Spillage: Absorb the liquid with inert materials (e.g., activated carbon or sand) and collect in closed containers.
• Disposal:

1. Cured Resin (Solid): It is an inert polymer and can be disposed of as non-hazardous industrial waste.
2. Liquid Resin (Uncured): Never pour into drains or sinks. Dispose of through authorized incineration for special waste.

• Transport: NON-hazardous product for transport purposes (Exempt from IATA, IMDG, ADR, DOT restrictions).
• Main Source: MSDS Safety Data Sheet (LST250798135MR)