SNAPMAKER 2.0 LASER MODULE - 40W

Snapmaker Laser Module is our latest high power diode laser addon, featuring Air Assist. Users can upgrade their printers to much more powerful desktop laser cutters with this powerful module.

Characteristics:

• Cuts 20mm of pine in one pass
• Equipped with Air Assist
• The Air Assist can be controlled via Luban
• Integrated quick exchange mechanism

Snapmaker Laser Module is our latest high power diode laser addon, featuring Air Assist. Users can upgrade their printers to much more powerful desktop laser cutters with this powerful module.

General characteristics:

• Cutting 20mm pine wood in one pass
• 15mm basswood plywood cut in one pass
• Equipped with Air Assist (including Air Assist pump)
• Air Assist can be controlled via Luban
• Integrated quick exchange mechanism
• Focus laser with focus lever
• Align your work with the crosshairs
• Laser safety shield
• Orientation detection
• Overheat protection

Intelligent air assistance

Prevent carbonization, improve the quality of your work and keep the laser lens clean. Air Assist can be controlled by Luban, saving you the hassle of manually turning it on or off for different layers.

Over 1000 ready-to-use templates in Luban

When you are doing both engraving and cutting in one job, it is not recommended to apply Air Assist on all layers. Therefore, Luban can allow you to enable Air Assist only on the cutting layers, saving you the hassle of manually turning it on or off for different layers. Provide a large library of current templates, including common patterns, shapes, and icons, to allow you to create a design in minutes.

Easy to focus

Calibrate the focus by entering the material thickness on the touchscreen and perform autofocus or laser focus with the focus lever.

Laser safety shield

Reduce laser radiation. In conjunction with the use of Enclosure for 2.0, Artisan or Ray, laser hazards can be reduced from Class 4 to Class 1.

Compatibility:

• Snapmaker 2.0 Quick Change Kit
• Snapmaker 2.0 A350T/A350, A250T/A250, F350/F250
• Snapmaker 2.0 A150 (only compatible with 20W)