PRIMACREATOR AIR-TIGHT FILAMENT STORAGE KIT

Placing your filament spools in a vacuum-sealed bag is an excellent way to protect them. Bags prevent dirt, dust, and most importantly, moisture from reaching your filament. Keeping your filament sealed and dry is the best way to protect it and preserve its properties. This is especially true for hygroscopic filaments like Nylon (PA) and PVA.

Features

• Seal your filament for perfect storage
• Keep out dust and moisture
• Reusable

By correctly storing your filaments sealed and dry, you will help extend their lifespan and ensure that the quality of your prints is always the best possible.

Easy to use:

The storage kit is very easy to use. Place your filament spool in a vacuum bag, add a silica gel pack and a humidity indicator, seal the bag, and use the pump to remove the air. Keep the air valve against a flat surface to help maintain a tight seal with the pump. The valve is self-sealing for easier use.

Make sure to place the humidity indicator so you can keep an eye on it. As long as the dots on the indicator remain brown, your filament is safe and dry. If the indicator starts to turn blue, there may be moisture in the bag, and you should repack the spool with a new silica gel pack.

The vacuum bags are resealable and can be reused.

Each set contains:

• 1 vacuum pump
• 10 vacuum bags - 350 x 310 mm (suitable for most 1kg filament spools)
• 15 humidity indicators
• 15 silica gel packs.

Additional vacuum bags, humidity indicators, and silica gel packs can be purchased separately.