Preservation method:

1. Keep away from light sources and at room temperature. (The sun contains a lot of UV light, it will solidify the photosensitive resin. After testing, the light is not affected until it is UV light.)
2. It is recommended to store at 15-35° room temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or humidity may affect the printing quality. The sun contains a lot of UV light, it will solidify photosensitive resin.

Use:

1. Shake well before use, prohibited to use resin in places where there is a lot of sunlight.
2. Wear gloves before use to avoid direct contact with skin and keep the environment ventilated.
3. Inadvertent contact, rinse the affected body part with plenty of water as soon as possible. If you feel unwell, seek medical attention promptly.
4. Printed models should be cleaned with high concentration alcohol for at least 30S (recommended concentration of 95% or more, the higher the better).
5. Do not pour the resin from the vat into the unused resin bottle, do not leave the resin in the resin vat for a long time without using it, to avoid alteration of the resin that may affect the printing effect (the resin not used for a long time can be put in airtight containers or sealed with protective film).
6. The resin has a shelf life of up to 18 months