Pro3dure GR-13 / GR-13.1 / GR-13.2: 3D resin for dental and orthodontic models

Description

The resins GR-13 series Pro3dure are 3D printing resins for the additive manufacturing of dental and orthodontic models ; the variant GR-13 It is indicated for the production of restorative dental models , while the variants GR-13.1 And GR-13.2 are optimized for the production of orthodontic models , with dimensional and opacity characteristics ideal for thermoforming and aligner applications.

Models produced with GR-13 resins can be used and finished according to normal dental laboratory processes.

The resins are available in the colors: Beige (GR-13), Matt cream-white (GR-13.1), Grey (GR-13.2).

COMPATIBLE WITH DLP/LCD/SLA 3D PRINTERS that emit light at ≤ 405 nm

---

3D resin GR-13 for dental models

3D resin GR-13 Pro3dure is a resin for generative manufacturing of restorative dental models based on image projection systems (≤ 405 nm). The GR-13 resin formulation is optimized for the demands of high-volume production, ensuring consistently high quality.

GR-13 resin meets all mechanical and application requirements for dental models. The material can be used for building processes with thick layers from 50 to 100 μm .

Technical data

---

3D Resin GR-13.1 / GR-13.2 for Orthodontic Models

3D resin GR-13.1 And GR-13.2 Pro3dure are resins for the generative production of orthodontic dental models based on image projection systems (≤ 405 nm).

The formulation of the GR-13.1 and GR-13.2 variants is optimised for the needs of a consistent production that ensures a consistently high quality, with opacity and contrast of the margin lines ideal for orthodontic workflows.

Specifications

* not applicable — ** according to internal design specifications and requirements — *** data from representative sample in internal quality control Pro3dure medical GmbH

---

Instructions for use

The bottles of resin GR-13 / GR-13.1 / GR-13.2 must be Shake well before use .

Make sure the resin is at a temperature between 23°C and 30°C . If possible, always keep a bottle in the laboratory to avoid temperature differences during refilling.

Carefully pour the resin into the image projection unit's tray. Bubbles can be removed with a clean spatula or by gently moving the resin.

To adjust the construction parameters, consult the machine's technical data sheet.

Once the construction process is complete, direct post-treatment is recommended; if this cannot be guaranteed, leave the produced pieces in the resin.

After the cleaning of parts with isopropanol ≥ 97% (about 4 minutes in an ultrasonic bath — pre-cleaning is recommended), the components are post-polymerized for 4 minutes in a suitable light curing unit, preferably in inert atmosphere .

Dental models produced with GR-13 model resin can be covered and repaired as usual.

Impurities due to operating errors cannot be ruled out. Given the viscosity of the resin, it is possible filter GR-13 resin. It is recommended to filter and stir the resin regularly. To avoid bubbles, let the resin rest for 1 hour before use .

---

Important

To avoid harmful effects on the quality of the material, never expose the liquid material to irradiation .

Deviations from the manufacturing process described may lead to different mechanical and optical properties of the GR-13 resin model.

Ensure the use of personal protective equipment during processing.

Caution : Cured resins are chemically resistant — avoid staining clothing!

Avoid contact with skin and eyes. In case of accidental contact, rinse with plenty of running water; consult a doctor if necessary.