Pro3dure GR-12 cast — 3D Resin for Dental Casting Molds

Description

The resin printodent® GR-12 cast Pro3dure is a photopolymerizable resin based on urethanedimethacrylates, initiators, colorants and stabilizers , indicated for the generative production of dental casting molds using image projection systems (≤ 405 nm). The GR-12 cast formulation is optimized for the demands of robust production, ensuring consistently high quality.

Models produced with GR-12 cast resin can be repaired and used with common dental veneering materials , fully integrating into the digital dental workflow.

Available in red (REF: D1000737) in 1 kg pack.

COMPATIBLE WITH DLP/LCD/SLA 3D PRINTERS

---

GR-12 cast 3D resin for dental casting molds

3D resin GR-12 cast Pro3dure is a resin for generative manufacturing of dental casting molds based on image projection systems (≤ 405 nm). The formulation is optimized to ensure robust production and consistently high quality; the material can be used for construction processes with layers from 10 to 100 μm .

Main advantages:

• ✅ Resin dedicated to the production of dental casting molds high precision
• ✅ Compatible with standard dental coating materials (investment compounds)
• ✅ Low viscosity (< 250 mPa s) — easy cleaning and filtering
• ✅ Compatible with CAD software (e.g. exocad) and Pro3dure post-curing devices (CD-1, CD-2)
• ✅ Compatible with printers DLP / LCD / SLA (≤ 405 nm)
• ✅ Layer from 10 to 100 μm

Specifications

* Post-cured material values ​​depend on the light-curing unit used. Data from measurements of a representative sample as part of Pro3dure's internal quality control.

---

Instructions for use

The bottles of GR-12 cast resin must be Shake well before use .

Make sure the resin is at a temperature between 23°C and 30°C . If possible, always keep a bottle in the production unit to avoid temperature differences during refilling.

Carefully pour the resin into the image projection unit's vat. Bubbles can be removed with a clean spatula or by using the recoater routine.

To adjust the construction parameters, refer to the machine's technical data sheet.

Once the building process is complete, direct post-treatment is recommended; if this cannot be guaranteed, leave the produced parts in the liquid GR-12 cast resin.

Due to the low viscosity of GR-12 cast resin, it can be filtered and stirred regularly. To avoid bubbles, let the resin rest for 1 hour before use .

1. Prepare the data (CAD & build preparation)
2. Choose the parameters process (build style, etc.)
3. Transfer data to the 3D printer
4. Prepare the print — shake the bottle
5. Fill the tray of the device resin
6. Start printing and build the components
7. Cleaning of pieces : IPA ≥ 97% — approx 3-5 min. in an ultrasonic bath
8. Drying : until there are no IPA residues
9. Post-curing (3-4 min.) in a suitable light-curing unit (e.g. CD-1 or CD-2 from pro3dure medical) in protective atmosphere
10. Finishing parts : Models can be repaired and used with standard dental veneering materials

---

Important

To avoid harmful effects on the quality of the material, never expose the liquid material to irradiation .

Deviations from the manufacturing process described may lead to different mechanical and optical properties of the GR-12 cast resin.

Ensure the use of personal protective equipment during processing: butyl rubber gloves (EN ISO 374), goggles with side protection, protective clothing.

Caution : Cured resins are chemically resistant — avoid staining clothing!

Avoid contact with skin and eyes. In case of accidental contact, rinse with plenty of running water; consult a doctor if necessary. batch number and the expiration date are indicated on each package — do not use the product after the expiry date.

CLP classification (EC Reg. 1272/2008) : Skin Irrit. 2 (H315), Eye Irrit. 2 (H319), Skin Sens. 1 (H317), Aquatic Chronic 2 (H411).

⚠️ Transport note : Classified as environmentally hazardous in liquid form — UN 3082 , hazard class 9, packing group III.

---

Warning

IDM di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by IDM di Marin Davide, which cannot be held liable for any damage caused by the use or application of the material. The material should be used only on suitable machines and by specialized personnel, exclusively for the intended purpose, according to the manufacturer's instructions. For European-certified resins, the properties of the finished product vary depending on the entire printing and post-curing process; please consult the manufacturer for any relevant information.