PRIMASELECT PLA SATIN - 1.75MM - 750 G - BLUE

Make sleek, classy 3D prints from silk PLA 3D printer filament. PrimaSELECT Satin PLA filament has a silky, shimmering surface. The satin finish gives your 3D prints a very noble look.

PrimaSELECT PLA satin 3D printer filament from PrimaCreator

Buy this frosted PLA filament and you will get a shiny, silky, excellent and very high quality 3D printing material. Finished 3D prints made with PLA silk filament have silky, shimmering surfaces. The satin finish gives your 3D prints a very elegant look.

Material properties PrimaSELECT PLA Satin:

• Sparkling silk PLA filament for your 3D printer
• Create impressive works of art with satin PLA filament
• Frosted filament is as easy to work with as regular PLA
• Non-toxic material without harmful fumes
• Perfect for your artwork and design ideas

PLA 3D printer filament in silky, shiny colors

PrimaSELECT PLA Satin is available in a wide range of silky colors. The filament is made of modified PLA material and is much stronger than normal PLA material. This is due to the added additives, which have been mixed with the best raw materials.

Free from unpleasant odors and toxic fumes

The filament is non-toxic and free from unpleasant odors during processing. 3D prints with Silk PLA impressive noble-looking objects and works of art, covered with a silky touch.

Super 3D prints with top layer adhesion

Achieve super 3D printing results easily and reliably with extremely strong adhesion between individual layers. Polylactic acid (PLA) is a biodegradable polymer.

Use PLA Satin filament on all your 3D printers

Process PrimaSELECT PLA Satin filament on all your 3D printers, including those with Bowden material feed/extruders. If you have a dual extruder 3D printer and want to 3D print with support material, we recommend using PrimaSELECT PVA. This support material bonds well to PLA Satin and is easy to remove. Simply place it in a water bath. The PVA will then dissolve.

Optimal adhesion and wrapping

PrimaSELECT PLA adheres to BuildTak or glass sheets coated with adhesive spray or glue stick. Prima Filaments filament comes on a clear spool. Just check how much filament is left on the spool and see if you need to change the roll.

Material data:

• Density: 1.24 g/cm³
• Extruder/nozzle temperature: 185-220 °C (recommended: 210 °C)
• Bed temperature: 0-60°C
• Recommended processing speed: 30-80 mm/s
• Melting temperature: 210°C ±10˚C
• Material weight: 750 g
• Coil size: 200 x 80 mm
• Coil internal diameter: 51.5 mm