POLYMAKER PETG 1.75mm 1kg

Polymaker™ PETG is a high-speed, high-strength PETG filament engineered to deliver reliable performance in a wide range of functional applications. Its high-flow formulation allows for clean and precise extrusion at speeds up to 300mm/s with a standard nozzle, or 500mm/s+ with high-flow nozzles, while maintaining excellent layer adhesion, dimensional stability, and surface quality. With superior inter-layer adhesion, low warpage, and clog-free extrusion, it delivers professional, high-quality results straight out of the box. Compatible with most FDM printers, it requires no enclosure.

Key Features

• Print speeds up to 300mm/s (standard nozzle) or 500mm/s+ (high flow nozzle)
• Superior inter-layer adhesion – stronger interlayer bond than competing PETG
• Low warpage and clog-free extrusion – reliable even for large prints
• Chemical resistance and ~70°C working temperature for indoor and outdoor use
• No enclosure needed – compatible with most FDM printers
• AMS compatible spool – neatly wound and vacuum-sealed
• Available in 1.75mm, in 20+ colors

Polymaker™ PETG – High Speed, High Strength, High Quality

Polymaker™ PETG is the new generation of PETG filament, replacing PolyLite™ PETG with a faster, stronger, and easier to print formula. Designed for both rapid prototyping and end-part production, it combines high-speed extrusion with superior mechanical performance, delivering functional, dimensionally stable, and professional-looking prints straight out of the box.

High Flow Printing at Any Speed

Polymaker™ PETG’s high-flow formulation allows for clean and precise extrusion at speeds up to 300mm/s with a standard nozzle. Pairing it with a high-flow nozzle can achieve printing speeds of 500mm/s or above, without compromising layer adhesion, surface finish, or dimensional accuracy. Whether using a high-speed printer or a standard setup, Polymaker™ PETG ensures consistent results at any speed.

Stronger, Smoother, and More Reliable

Polymaker™ PETG is engineered to deliver reliable performance even on long production runs. The new formula offers superior inter-layer adhesion, stronger than competing PETG alternatives, resulting in parts resistant to cracking and delamination under mechanical stress. Its low warpage and clog-free extrusion make it an ideal choice for functional prints that need to be perfect the first time.

Ideal for Functional Parts and End-Use Applications

From gears, brackets, and fixtures to outdoor tools, sports accessories, and cosplay props, Polymaker™ PETG delivers the perfect balance of strength, flexibility, and aesthetic quality. Its chemical resistance and heat deflection temperature of approximately 70°C make it suitable for both indoor and outdoor functional applications, including parts exposed to moisture, UV, or mechanical loads.

Compatible with Any Printer

Polymaker™ PETG filament prints seamlessly on most FDM printers, with no enclosure needed. It works perfectly with AMS and other multi-material systems, thanks to its neatly wound and system-compatible spool. Vacuum-sealed in Mylar pouch with desiccant ensures the filament arrives dry and ready to print.

Typical Applications

• Functional Parts – Gears, Brackets, Jigs & Fixtures
• Outdoor & Weather Resistant Components
• Sports Accessories & Protective Housings
• Cosplay Props & Display Models
• Electronic Enclosures & Tool Holders
• Prototypes Requiring Strength & Dimensional Accuracy

Packaging

Each spool is vacuum-sealed in a Mylar bag with a desiccant pack to keep the filament safe from moisture from the factory to your printer. The spool and box are made from recycled and recyclable materials, and the spool is designed to be AMS and multi-material system compatible. Neatly wound to prevent tangles and ensure reliable feeding from the first to the last layer.

Print Settings

• Nozzle Temp: 240 °C – 260 °C
• Bed Temp: 60°C – 70°C
• Printing Speed: up to 300 mm/s
• Cooling Fan: 20% – 60%
• Direct Drive Retraction: 1 mm / 20 mm/s
• Bowden Retraction: 3 mm / 40 mm/s
• Drying: 55 °C for 6 hours (only if moisture absorbed)

Important Note on Moisture

Polymaker™ PETG filament is highly hygroscopic. Once opened, store your filament in an airtight container with desiccant. If you experience popping or crackling during extrusion, or excessive stringing, dry the filament at 55 °C for 6 hours prior to printing. For optimal results, we strongly recommend using a filament dryer like the PolyDryer™ Box.