POLYMAKER POLYDISSOLVE S1 PVA - 750g
POLYMAKER POLYDISSOLVE S1 PVA - 750g
Couldn't load pickup availability
PolyDissolve™ S1 is a water-soluble support for PLA, TPU, PVB, and nylon filaments from the Polymakers portfolio. It is specifically designed to interface seamlessly with these materials while still exhibiting good solubility.
Characteristics:
- Soluble in water
- Good adhesion to various materials
Polydissolve
PolyDissolve™ is a family of soluble support filaments. This family offers support solutions for Polymaker's filament portfolio. It allows for greater design freedom.
PolyDissolve S1
PolyDissolve™ S1 is a preferred solution when printing complex geometries, overhangs, internal cavities, and intricate structures. It frees you from support removal issues and allows for greater design freedom.
Recommended settings
- Nozzle temperature: 215˚C – 225˚C
- Printing speed: 30 mm/s – 40 mm/s
- Bed temperature: 25˚C – 60˚C
- Bed surface: glass with glue, blue tape
- Cooling fan: on
Note: It is highly recommended to use PolyBox™ when printing with PolyDissolve™ S1 and to store it in the resealable bag.
| Basic data | |
| Material | PVA |
| Diameter | 2.85 mm |
| Weight | 0.75 kg |
| Length | 104 meters |
| Color | Natural |
| Print parameter | |
| Minimum recommended printing temperature | 215 °C |
| Recommended maximum printing temperature | 225 °C |
| Recommended minimum bed temperature | 25 °C |
| Maximum recommended bed temperature | 60°C |
| Minimum recommended print speed | 30 mm/s |
| Recommended maximum print speed | 40 mm/s |
| Maximum recommended retraction | 20 millimeters |
| General | |
| Specific weight | 1.13 g/cm³ ISO 1183 |
Shipping and Warranty
Shipping and Warranty
All products available in stock will be delivered with an average timing of 24/48 hours.
Italy warranty with dedicated consulting support, contact us!
