Phrozen Water-Washable Dental Model 1kg
Phrozen Water-Washable Dental Model 1kg
Couldn't load pickup availability
Phrozen Water-Washable Dental Model is a professional photopolymer resin designed for high-precision dental models, optimized for Phrozen 3D printers and easily washable in water, ideal for dental laboratories looking for speed of processing and reduction of isopropyl alcohol consumption.
Product Description
This dental model resin is a low-viscosity acrylic formulation that provides a smooth surface, sharp details, and dimensional stability suitable for making aligner models, temporary crowns, aesthetic mock-ups, and clinical case studies. The characteristic water-washable It allows for post-print washout simply with water, reducing odors, cleanup time, and solvent costs compared to traditional resins. The resin is designed to work safely on closed printers with adequate ventilation, maintaining good stability under normal conditions of use and storage. It is not classified as dangerous goods for transport by land, sea, or air, simplifying logistics and shipping for studios and laboratories. It is a versatile solution for those requiring an efficient digital workflow, with attention to waste management and compliance with major international chemical regulations.
Main technical specifications
| Voice | Value / Description |
|---|---|
| Resin type | Water-washable acrylic photopolymer resin for dental models |
| I wait | Brown viscous liquid |
| Odor | Typical acrylic smell |
| Density | Approximately 1.11 g/cm³ |
| Recommended use | Dental models on Phrozen 3D printers |
| Compatibility | For Phrozen UV resin 3D printers |
| Storage interval | 15°C – 35°C (cool, dry area, away from heat and direct sunlight) |
| Stability | Stable under normal conditions of use and storage |
| Modeling color | Dental model color (lab brown/beige tone) |
| Boiling point | About 104.5°C at 2.05 hPa |
| Decomposition temperature | About 240°C |
| Vapor pressure | About 0.5 hPa at 86.6 °C |
| Solubility | Not miscible with water; mechanical washing with water recommended after printing |
| GHS classification | Skin Irrit. 2, Eye Dam. 1, Skin Sens. 1, Repr. 1B, Aquatic Chronic 3 |
| Main risk phrases | Irritating to skin and eyes, possible skin sensitizer, reproductive toxicant, harmful to aquatic life with long lasting effects |
| Recommended PPE | Chemical gloves (e.g. NBR 0.6 mm), safety glasses, protective clothing |
| Ventilation | Use only in well-ventilated areas or with local exhaust ventilation. |
| Transport | Not classified as dangerous goods (DOT, IMDG, IATA/ICAO) |
| Disposal | Do not discharge into sewers; dispose of as special waste in accordance with local regulations. |
| Producer | Phrozen Tech Co., Ltd., Hsinchu City, Taiwan |
Warnings for use and safety
- Always wear gloves, eye protection and protective clothing during handling, printing and post-processing to reduce contact with skin and eyes.
- Avoid inhaling vapors and work in well-ventilated areas or with dedicated extraction near the printer.
- Keep the bottle tightly closed, away from heat, UV rays and direct sunlight to maintain the quality of the resin.
- In case of contact with eyes, rinse thoroughly with water for at least 10 minutes and consult a doctor immediately.
- Do not dispose of the product or residues in the environment; follow local instructions for the disposal of chemical waste.
Shipping and Warranty
Shipping and Warranty
All products available in stock will be delivered with an average timing of 24/48 hours.
Italy warranty with dedicated consulting support, contact us!
