Modifi3D Pro

Modifi3D PRO is an evolution of the 3D printing tool. It's now more robust and powerful. Adjustable temperature control via LCD display has been added. The temperature can now be set up to 450°C to accommodate new tips and accessories.

Highlights

• 10 interchangeable tips
• Special coating on the tip to prevent sticking
• Simple and easy to use
• Rapid heating to 200ºC in less than 25 seconds
• LCD screen
• Adjustable temperature control
• Power 30W (maximum temperature 450ºC)
• Adjustable Standby and Sleep modes
• Basic support included

Modifi3D Pro

Modifi3D PRO is an evolution of the 3D printing tool. It's now more robust and powerful. Adjustable temperature control via LCD display has been added. The temperature can now be set up to 450°C to accommodate new tips and accessories.

The PRO is designed to replace much of the sanding, scraping, and chamfering required to finish 3D prints and comes with 10 interchangeable tips. The new, improved tips are more durable and offer more features, including the ability to create countersinks and insert threaded inserts.

How to use

• Select a tip and screw it into the heater cover tube. Leave the heater cover tube and locknut in place (this is only for rotation adjustment, if necessary).
• Place Modifi3D PRO on the included stand.
• Connect to the DC jack of Modifi3D PRO and plug the wall adapter.
• Once connected to power, the LCD display will show the version number for a few seconds and then switch to the actual temperature. The default initial temperature is 300°C.

Temperature regulation

To set the temperature, press the +/- buttons until the desired temperature is selected. After a few seconds, the LCD display will show the actual temperature. The temperature is adjusted in increments of 1°C. To adjust in increments of 10°C, press and hold the + or - buttons repeatedly.

Standby/Sleep Mode

If Modifi3D PRO is left idle for the selected standby time, it will enter standby mode and the temperature will drop to the selected standby value. While in standby mode, it will enter sleep mode after the selected time. When Modifi3D PRO is moved, it will wake up and automatically switch to operating mode and the temperature will rise to the last selected temperature.