Micro Swiss Nozzle for Ultimaker2+ 0.8mm
Micro Swiss Nozzle for Ultimaker2+ 0.8mm
Couldn't load pickup availability
MICRO SWISS NOZZLE FOR ULTIMAKER2+
This is a RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficients of friction, better than PTFE co-coated nickel. This coating is also very hard and abrasion resistant. If you are working with abrasive carbon fiber, stainless steel, filled wood or any other metal filled filament, this will greatly improve the life of your nozzle.
*M6 thread, filament diameter 3mm.
Available orifice sizes: 0.25mm, 0.3mm, 0.4mm, 0.6mm and 0.8mm
Suitable for:
- Olson Block
- Ultimaker 2+
| Brand | Swiss Micro |
| Type | RepRap M6 3mm |
| Material | TwinClad XT plated brass |
| Diameter | 0.80mm |
| Packaging | 1 |
| Suitable for | |
| Olsson Block | |
| Ultimaker 2+ | |
| Ultimaker 2+ Extended | |
| Ultimaker 2 with Olsson block upgrade | |
| Ultimaker 2 Extended with Olsson Block Update | |
| Ultimaker Original *1 *2 | |
| Ultimaker Original+ *1 *2 | |
| Lulzbot TAZ 3 with hex hotend upgrade *2 | |
| Lulzbot TAZ 4 with hex hotend upgrade *2 | |
| The TAZ 5 bot | |
| The little TAZ 6 *2 *3 | |
| 3ntr A2 v2 | |
| 3 A4 numbers v3 | |
| Any printer with a 3.0mm E3D V4 hotend *2 | |
| Any printer with a 3.0mm E3D V5 hotend *2 | |
| Any printer with a 3.0mm E3D V6 hotend *2 | |
| *1 = You will need to adjust the fan shroud as the nozzle is shorter than the original nozzle. | |
| *2 = It will need to be fitted with the nozzle not positioned against the front surface of the heating block, but against the heat cut-off tube/insulator to create a seal. | |
| *3 = Will require turning off automatic bed leveling as the ruby tip is non-conductive. |
Shipping and Warranty
Shipping and Warranty
All in-stock products will be delivered within an average of 24/48 hours.
Italian Warranty with dedicated consulting support, contact us!
