Do you have warping problems when 3D printing? So MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of non-sticky first layer (warping). This is the most common problem in 3D printing for production with FFF/FDM technology.

Product Features of Magigoo Sticker:

• The pen with adhesive makes your 3D prints stick easily to the surface
• Minimizes warping
• Save time, filaments and nerves

WHY :

BASF Ultrafuse 316L enables the production of solid 316L grade stainless steel parts through the use of desktop FDM 3D printers and a sintering process. Ultrafuse® 316L filament consists of highly refined metal particles embedded in thermoplastic binders. Therefore, as a filament, the metal-polymer composite presents none of the occupational and safety risks associated with handling fine metal powders. This enables economical, simple and safe 3D printing of stainless steel parts.

Due to the thermoplastic nature of the filament binder materials and differential thermal cooling during FDM printing, BASF Ultrafuse® 316L printed parts are prone to warping. Additionally, due to the delicate nature of the green part, care must be taken when removing parts printed in BASF Ultrafuse® 316L to avoid warping of the part. Magigoo Metal provides secure and reliable adhesion during printing and allows for easy removal of the printed part through immersion in water, thus avoiding potential damage to the green part.

AS :

A build plate temperature of 95-105°C is recommended for using Magigoo Metal with BASF Ultrafuse® 316L, however, printing conditions may vary between printers.

• Shake the bottle.
• Apply to the desired area by pressing the tip into the bed (activating the internal valve) and distributing as needed.
• Print according to the filament/printer manufacturer's recommendations
• After printing. Submerge the entire build plate in water or soak the portion around it with water. After a short period of time, generally 30 minutes to 2 hours, depending on the size of the part, the part should come off on its own or be easy to remove with a gentle twist.
• Clean up any residue: use a damp cloth to clean.

SAFETY :

Using this product with filaments other than BASF Ultrafuse 316L may cause excessive adhesion and damage the build surface. Follow the instructions in the technical data sheet for best results.