MAGIGOO PRO FLEX - THE 3D PRINTING ADHESIVE

Do you have warping problems when 3D printing? So MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of non-sticky first layer (warping). This is the most common problem in 3D printing for production with FFF/FDM technology.

Product Features of Magigoo Sticker:

• The pen with adhesive makes your 3D prints stick easily to the surface
• Minimizes warping
• Save time, filaments and nerves

WHAT:

MAGIGOO Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once cooled and glue residue should also be easily cleaned off.

WHY :

TPU, TPE/TPC describe a group of polymers that are sometimes called thermoplastic rubbers. Thermoplastic rubbers exist as copolymers or as a polymer blend, generally composed of a plastic and a rubber. This gives both thermoplastic and elastomeric properties. Consequently, these materials have the advantage of being able to stretch to moderate elongations and return to their original shape.

Furthermore, these materials have excellent thermal properties, material stability, chemical resistance and are more convenient to produce. As a result these materials are highly sought after in industrial applications.

Some flexible filaments exhibit poorer adhesion to conventional 3D printing build surfaces and a high tendency to warp. Others tend to adhere too well to bare 3D printing surfaces like glass and PEI. MAGIGOO Flex is a specialized flexible filament FDM printing solution developed to work with a wide number of flexible filament types. MAGIGOO Flex acts as an intermediate layer between the build plate and the printed part allowing for good adhesion and making it easy to remove the print as needed.

AS :

MAGIGOO Flex has been designed and tested to work with several brands of flexible filament.

• Shake the bottle.
• Apply to the desired area by pressing the tip into the bed (activating the internal valve) and distributing as needed.
• Print according to the filament/printer manufacturer's recommendations
• Leave to cool and remove. The print should come off immediately
• Clean : Use a damp cloth to clean.

SAFETY :

Using this product with filaments other than flexible types may cause excessive adhesion and damage the build surface.

Suggestions :

For larger prints and filaments with a high shrinkage rate, a 20mm brim is recommended.
In case of excessive adhesion, it is recommended to wet the print bed with a small amount of water and work it slowly under the part, this should make it easier to remove the part.