LAYBRICK STONE FILAMENT

LayBrick has the look and feel of sandstone and is simply fantastic for architectural models and landscaping.

Printed objects can also be colored and easily ground.

• For architectural/landscape models
• No plastic feel
• Printed objects can be colored and ground easily
• Adheres well to the print bed
• A heated bed is not necessary
• Contains natural mineral fillers (superfine ground chalk) and harmless copolyesters
• A new filament - for large architectural objects/models
• (uses all the space in your jumbo printer)
• Dimensions of the object in the video: 30 x 20 x 2 cm 11.8 x 7.9 x 0.8 inches
• Very rough surface, close to sandstone
• Ideal for jumboprinters
• Almost zero curvature!!!

Recommended print settings:

• Printing temperature: 165°C to 210°C, surface smooth to rough, 165°C lower to 210°C higher exuding
• You can print with a layer thickness between 0.1 mm and 0.5 mm
• Slicing: max. object filling 25%, the fan must be on
• It is recommended to print in rooms with min. 20°C. Colder, more fragile
• If you print with code M227 // values ​​f and S:30000 P 10000
• After printing, wait until the object hardens, then remove it from the platform
• Stable temperature up to approximately 70° Celsius

Beta version:

It means that the gray color of the filament may change to shades, the filament is also a little virgin, it may break when bending, you should be sure (especially during a long print) that you can insert a broken part of the filament back into your printer.

Package:

250 grams of 1.75mm LayBrick filament