Formbot Voron Trident R2 Ultra Printer Complete Assembly Kit
Formbot Voron Trident R2 Ultra Printer Complete Assembly Kit
Couldn't load pickup availability
Complete assembly kit for the Voron Trident R2 Ultra CoreXY 3D printer, available in 250, 300, and 350 mm sizes, featuring original Misumi extrusions, BTT Manta M8P + CB1 electronics, EBB SB2209 CANbus board, Cartographer3D sensor, MOONS' motors, and a 5" HDMI touchscreen.
IMPORTANT: The heated bed, whether in the new version (full scale) or the previous version (official Voron size), is shipped randomly and cannot be selected prior to shipment.
The Formbot Voron Trident R2 Ultra Printer Kit (Model: Trident R2 Ultra) is a high-end construction kit based on the renowned CoreXY architecture with a moving build plate on three independent points (3-motor Z-tilt leveling) from the Voron Design project. Available in three different build volume sizes — 250 × 250 × 250 mm, 300 × 300 × 250 mm, and 350 × 350 × 250 mm — the machine is designed to print with high precision (layer height 0.05 – 0.3 mm) and speeds up to 250 mm/s (300 mm/s travel) using both standard filaments and high-temperature technical polymers, thanks to a 0.4 mm nozzle capable of reaching 300 °C and a heated bed up to 110 °C. The Bill of Materials includes premium, selected components: original Misumi aluminum structural extrusions, MGN9H and MGN12H linear rails, MOONS' stepper motors, Bigtreetech Manta M8P + CB1 electronics with silent TMC2209 drivers, EBB SB2209 (RP2040) CANbus toolhead board, Cartographer3D leveling sensor, Nevermore activated carbon air filtration, and a 5/16" cast aluminum precision-milled print plate with a flexible spring steel surface.
At a glance – Your benefits
- Three Print Sizes Available: Choose the work area that best suits your needs from 250 × 250 × 250 mm, 300 × 300 × 250 mm, and 350 × 350 × 250 mm, while maintaining a maximum print speed of 250 mm/s and travel speeds up to 300 mm/s.
- Rigid Frame with Original Misumi Extrusions and Linear Rails: Frame built with pre-machined Misumi aluminum extrusions and motion on MGN9H and MGN12H linear rails with GT2 LL-2GT-6 belts and F695 bearings / GE5C spherical joints.
- BTT Manta M8P + CB1 Electronics and CANbus Toolhead: Integrates the BTT Manta M8P motherboard with CB1 module and 5 TMC2209 drivers, paired with the EBB SB2209 CAN (RP2040) board to drastically reduce wiring to the print head.
- Cartographer3D Rapid Leveling and 5" Touch Display: Equipped with a Cartographer3D Leveling Sensor for rapid bed mapping, a 5" HDMI Touch Screen, and a wide-angle USB camera for remote monitoring.
- Original MOONS' Stepper Motors: Equipped with 2 MOONS' MS17HD6P420I-08 motors for the XY axes, 1 MOONS' NEMA14 pancake motor with a 10T gear for the direct extruder, and 3 MOONS' NEMA17 TR8×4 300 mm linear motors for 3-point automatic Z-axis leveling.
- Enclosed Chamber for Engineering Polymers (300 °C / 110 °C) with Nevermore Filter: Transparent acrylic and Coroplast perimeter panels, nozzle up to 300 °C, silicone AC heated bed up to 110 °C (with 125 °C thermal fuse and Omron G3NB-210B-1 SSR relay) and Nevermore activated carbon filter kit.
Technical Specifications
| Feature | Description |
| Product Name | Formbot Voron Trident R2 Ultra Printer Kit |
| Model Code | Trident R2 Ultra |
| Available Print Volumes | 250 × 250 × 250 mm / 300 × 300 × 250 mm / 350 × 350 × 250 mm |
| Layer Height | 0.05 – 0.3 mm |
| Max Print / Travel Speed | 250 mm/s (print) / 300 mm/s (travel) |
| Max Nozzle / Bed Temp |
300 °C (nozzle) / 110 °C (AC heated bed with 125 °C thermal fuse) |
| Nozzle / Filament Diameter | 0.4 mm (nozzle) / 1.75 mm (filament) |
| Mainboard and Control |
BTT Manta M8P + CB1 with 5 × TMC2209 drivers, toolhead board EBB SB2209 CAN (RP2040) |
| Interface and Monitoring |
Display 5" HDMI Touch Screen, USB Wide-angle Camera, RGB LED strips, and Neopixel Stealthburner |
| Leveling Sensor |
Cartographer3D Leveling Sensor |
| Stepper Motors (MOONS') |
2 × MS17HD6P420I-08 (XY), 1 × NEMA14 Pancake 10T (extruder), 3 × NEMA17 TR8×4 300 mm (Z-axis) |
| Linear Motion |
MGN9H and MGN12H linear guides, GT2 LL-2GT-6 (6 mm) belts, GT2 20T pulleys |
| Print Bed |
5/16" cast aluminum tooling plate, adhesive magnetic sheet, flexible spring steel surface |
| Power Supply |
Meanwell LRS-200-24 power supply (200 W / 24 V) + Omron G3NB-210B-1 SSR solid state relay |
| Heatbed Note | The heatbed in the new version (full scale) or the previous version (official Voron size) is shipped randomly and cannot be selected prior to shipment. |
Package Contents (BOM Detail)
-
Frame, Panels & Vibration Management:
- Original Misumi extrusions (HFSB5 / HFSBS 2020 series in lengths dedicated to the chosen format), 2 × DIN 3 rails (35 mm) and 4 × anti-vibration rubber feet
- Enclosure panels: 3 × Coroplast panels (rear, mid, bottom) and 5 × transparent acrylic sheets (2 front, 2 side, 1 top)
-
Motion & Buildplate:
- Linear guides: 2 × MGN9H (400/350/300 mm depending on size), 1 × MGN12H (400/350/300 mm depending on size), 3 × MGN9H (300 mm)
- Belts and pulleys: 2 × 2090 mm GT2 LL-2GT-6 open belts, 2 × GT2 20T pulleys, 2 × GT2 20T toothed idlers, 26 × F695 bearings, 3 × GE5C spherical bearings, 3 × bakelite insulating columns
- Direct Drive extruder component kit + Hotend Kit
- Buildplate: 1 × 5/16" precision machined cast aluminum plate, 1 × adhesive magnetic sheet, 1 × flexible spring steel plate, 1 × silicone AC heater with thermistor and thermal fuse (125 °C)
-
Electronics:
- BTT Manta M8P + CB1 motherboard, 5 × TMC2209 drivers, EBB SB2209 CAN (RP2040) board, 3-in-6-out PCB module, TF Card
- Meanwell LRS-200-24 power supply, Omron G3NB-210B-1 SSR with DIN bracket, filtered power inlets (CW2A-10A-T and 16(4)A 250V), fuses (4A 220V and 8A 120V), C13 power cord
- MOONS' motors: 2 × MS17HD6P420I-08, 1 × NEMA14 Pancake with 10T gear, 3 × NEMA17 TR8×4 300 mm
- Sensors and peripherals: Cartographer3D Leveling Sensor, 5" HDMI Touch Screen display, USB Wide-angle Camera, Stealthburner Neopixel LEDs, 2 × RGB LED strips
- Fans (24 V): 3 × 50×50×15 blowers, 1 × 40×40×10 axial, 3 × 60×60×20
-
Cables, Filtration and Hardware (Cables, Misc & Fasteners):
- Complete wiring harness (Complete Wiring Harness), 10×11 cable chain (1000 mm), cable sleeve (1500 mm), 20×25 PVC cable ducts, WAGO 221 connectors (413 and 412), USB/Type-C/CAT6 cables, and CAT6 Keystone jack
- Filtration kit: carbon filter element for fume extractor + activated carbon pack for Nevermore filter
- Miscellaneous accessories: PTFE tubes (4×3 mm and 4×2 mm), 4 mm Bowden fitting, 3M VHB 5952 tape, foam tapes (1 mm and 3 mm), 22 × Ø6×3 mm neodymium magnets, brass nozzle brush, 2020 hinge
- Complete set of metric hardware (M2, M3, M4, M5), T-nuts (Drop-in and Hammerhead), and brass threaded inserts (Heat Set M3 and M5)
Shipping and Warranty
Shipping and Warranty
All in-stock products will be delivered within an average of 24/48 hours.
Italian Warranty with dedicated consulting support, contact us!
Share

-
Free shipping, 14-day returns*.
Information noticeFree express shipping for orders over €499.
*For terms and conditions of return, please visit our returns and refunds policy.
-
Do you wish to purchase multiple products?
Contact usContact us for a quote; discounts available for bulk orders!
-
Are you a professional or a company?
Contact usYou can request an invoice for your purchases! All prices for our products already include VAT.
-
Do you have the teacher's card?
Contact usProceed to checkout and select "Carta del Docente" as your payment method. Questions?