Strongman PLA filament 1KG 1.75mm - AzureFilm

Test print:

Recommended settings:
Nozzle temperatures: 200–230°C
Heated bed: Recommended 50–60°C
Print speed: 50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.

Strongman™ Black PLA filament is as solid as ABS filament, but has the functional characteristics of normal PLA.
Strongman filament was developed because printing with ABS filament is more difficult. Compared to conventional PLA filament, Strongman PLA is much more resistant, especially to impacts. It is used for printing drones, bearings, and any products that require greater resistance. The video shows the resistance test of regular PLA filament and Strongman PLA, using a half-kilogram weight. The result was that the regular PLA filament broke, while the Strongman PLA remained unchanged. In terms of thermal resistance, this filament has the same characteristics as regular PLA filament.

To achieve good results, you need to print at a temperature of 200–230°C and the bed should be heated to 50–60°C.
Please note that the printing temperature range may differ slightly depending on the type of printer used.

Strongman filament has a net weight of 1 kg (2.2 lbs) on a spool with an external diameter of 210 mm, internal diameter of 60 mm.
and 62mm wide. The filament is vacuum sealed and contains a moisture-absorbing bag that allows
The filament should remain dry. The thickness of PLA filament is 1.75 mm or 2.85 mm.