PVA Water-Soluble Filament for XYZprinting da Vinci - Nature, ⌀1.75mm 600g
PVA Water-Soluble Filament for XYZprinting da Vinci - Nature, ⌀1.75mm 600g
Couldn't load pickup availability
The original XYZprinting PVA (Polyvinyl Alcohol) filament is the ideal support material for creating complex 3D models. As a water-soluble polymer with a low melting point, it is specifically designed for dual-extruder 3D printers (such as the da Vinci 2.0 series). Used in combination with PLA, PVA allows you to create structures with overhangs and intricate geometries without having to manually remove the supports after printing: simply immerse the part in water to completely dissolve them.
Key Features
- Easy, Effortless Removal: Completely dissolves in water, eliminating the risk of damaging the model during manual cleaning.
- Perfect Integration: Easy-to-load cartridge format, designed to ensure maximum compatibility and extrusion stability.
- Material Compatibility: Formulated exclusively for use in combination with PLA filaments (not suitable for use with ABS).
Post-Processing Instructions
-
Support Removal: Once printing is complete, immerse the object in a container of clean water at a temperature below 50 °C for between 4 and 8 hours.
-
Hygiene and Timing Tip: A small amount of baking soda can be added to the water bath to speed up the dissolution process.
Technical Specifications
| Parameter | Value |
| Material | PVA (Polyvinyl Alcohol) |
| Product Code | RFPVAXEU00D |
| Filament Diameter | 1.65 mm |
| Net Weight | 600 g |
| Recommended Printing Temperature | 190 °C |
| Glass Transition Temperature | 45 °C |
| Compatible Printers |
da Vinci 2.0 (compatible with da Vinci 1.0A / 1.0AiO configurations with suitable modules) |
Operating and Storage Guidelines
-
Extruder Management: To prevent clogging, the use of a dedicated extruder is recommended (Code:
RS10XXY151B). ABS residue in the extruder can block the PVA filament and vice versa. -
Loading Procedure: To optimize insertion, push the filament into the guide tube until it reaches the drive gear. Press the release lever, push the filament down slightly by about 1–2 cm, release the lever and start the "LOAD FILAMENT" command.
-
Storage and Humidity: PVA is highly hygroscopic. Moisture absorption causes the filament to swell, making it unusable. Store the product in airtight, moisture-proof containers with desiccant, maintaining a relative humidity level below 30% RH.
Shipping and Warranty
Shipping and Warranty
All in-stock products will be delivered within an average of 24/48 hours.
Italian Warranty with dedicated consulting support, contact us!
