The E3D and Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, offering one of the most compact, lightweight and, most importantly, high-performance HotEnds to date.

Main features

• Compatibility: Bambu Lab P1S and P1P
• Diameter 1.75mm
• Instant replacement HotEnd for the Bambu P1 series
• 60% additional range compared to the standard Bambu hotend!
• Patent pending high flow technology incorporating Bondtech IP
• ObXidian hardened tip nozzle
• The E3DLC coating offers additional non-stick properties

E3D Fully Assembled High Flow ObXidian HotEnd for Bambu Lab P1 Series

The E3D and Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, offering one of the most compact, lightweight and, most importantly, high-performance HotEnds to date.

High flow

There's no denying that Bambu Lab's P1 series printers are designed for speed. However, the movement system, while impressive, has room to be even better. This is where E3D High Flow technology comes in. Using the patent-pending internal nozzle geometry first developed for the Revo High Flow, we were able to increase the volumetric flow rate of the hotend by 60%! This means you can expect more reliable and consistent extrusion at the same speeds or increase the volumetric flow rate limit in the slicer to take full advantage of the motion systems capabilities.

Smooth and hard

We've applied our E3DLC™ coating to the nozzle and heater block, adding even more abrasive resistance for all your fiber-filled fun and a protective non-stick layer to prevent plastic buildup on the nozzle.

No compromise

All of these new additions are the same form factor as your stock Bambu; it simply reuses the temperature sensor and heating pads and snaps into place without any support adjustments or need for parts cooling. You can follow Bambu's simple hotend replacement guide here.

What's in the box:

• 1 HotEnd only in metal
• 1 x Silicone Sock
• 1 x Hot End Clip
• 1 fan
• 1 heater
• 1 fixing