DJI Lito X1 FLY MORE COMBO PLUS (RC 2)

* All videos and images on this page were captured by professionals with DJI Lito X1 in strict compliance with local laws and regulations and have been edited in various ways in post-production. All videos and images are for reference only. Actual results may vary. Always observe local laws and regulations and ensure the drone has obtained the necessary certifications and airspace authorizations before flight.

** Data acquired with a production model of DJI Lito X1 in a controlled environment. Actual experience may vary depending on the environment, usage method, and firmware version.

*** All images, videos, and on-screen content related to the product on this page are for reference only. Actual product effects (including, but not limited to, appearance, color, size) and on-screen content (including, but not limited to, backgrounds, user interface, and illustrations) may vary.

1. The omnidirectional vision system provides assistance in ensuring flight safety only under certain conditions and does not replace user judgment and control. During flight, always pay attention to your surroundings and warnings in the DJI Fly app, use responsibly, and maintain control of the drone at all times. When GNSS signals are unavailable, the optimal altitude range for using the visual positioning system is between 0.5 and 30 m. The performance of the visual positioning system may decrease when flying beyond this altitude range. Fly with caution. The vision system may not function correctly when the drone is flying over water and may therefore fail to avoid the water surface below during landing. Operators must always maintain control of the drone, make operational decisions based on assessment of the surroundings, and avoid relying solely on the vision system. The vision system cannot detect certain objects or surfaces, including large structures with frames and cables (e.g., tower cranes, high-voltage pylons, high-voltage transmission lines, cable-stayed bridges); surfaces without texture or with poorly defined texture; surfaces with repetitive and identical patterns or textures (e.g., small tiles of the same color); solid-color surfaces (e.g., black, white, red, green); highly reflective or mirrored surfaces (e.g., ice, road signs); water or transparent surfaces; surfaces of moving objects (e.g., over moving crowds or wind-blown shrubs or grass); moving obstacles (e.g., walking people, moving vehicles); scenes with drastic changes in lighting; extremely dark surfaces (e.g., less than 1 lux) or extremely bright surfaces (e.g., more than 100,000 lux); materials with strong infrared absorption or reflection properties (e.g., mirrors, glass, road signs, asphalt); small obstacles (e.g., fences, branches, power lines) and thin poles or small vertical objects (e.g., lamp posts, streetlights). Under no circumstances should the sensing system be obstructed or interfered with. Ensure that all lenses remain clean, free of dirt, fingerprints, or other contaminants, and are not scratched. The vision system cameras may require calibration after a prolonged period of disuse. A message will be displayed in the DJI Fly app and calibration will be performed automatically. Do not fly in rain or fog or if visibility is less than 100 m. Before takeoff, inspect the glass surfaces of the sensing system. Remove any protective films, stickers, or other obstructions. If there are water droplets, fingerprints, or smudges, clean the glass using a lint-free cloth. Do not use alcohol or other organic solvents. If the glass surface is loose, broken, scratched, or worn, send the drone to an authorized service center for repair. Refer to the product user manual for further details.

2. ActiveTrack can only function correctly when certain flight conditions are met. Refer to note 1 to ensure that the omnidirectional vision system is in normal condition and avoid flying in the following environments or conditions: DO NOT fly in adverse weather conditions, such as strong winds (wind speed of 10.7 m/s or higher), snow, rain, lightning, or fog. DO NOT use the drone at altitudes of 4500 meters or higher above sea level. DO NOT use the drone in environments where the temperature is below -10 °C or above 40 °C. DO NOT take off from moving objects such as cars or boats. DO NOT use the drone near reflective surfaces, such as water or snow. Otherwise, the vision system may not function correctly. The vision system may not function correctly in low light conditions. Always fly cautiously and prevent the drone from entering Attitude mode. DO NOT fly near areas subject to magnetic interference or radio waves. Common sources of magnetic or radio interference include Wi-Fi hotspots, routers, Bluetooth devices, high-voltage lines, large-scale power transmission stations, radar stations, mobile base stations, and transmission towers. Exercise caution when taking off in a desert or from a beach, to prevent sand from entering the drone. Use the drone in open spaces and away from crowds of people. Buildings, mountains, and trees can block the GNSS signal and affect the onboard compass.

3. The actual weight of the product may vary due to slight differences in materials and external factors. Examination and training not required in most countries and regions. With the Intelligent Flight Battery Plus, the aircraft will weigh more than 249 g. Regulatory requirements vary by country or region. In the EU and UK, this Plus battery is compliant with regulations only when used with the DJI Lito X1 Combo Fly More Plus (DJI RC 2) aircraft. Always consult local laws and regulations before use.

4. Using the Intelligent Flight Battery, the maximum flight time is 36 minutes. Data acquired in a controlled wind tunnel under conditions equivalent to operation in no wind and at sea level, with the drone flying forward at a constant speed of 21.6 km/h, Obstacle Avoidance Action set to Brake, and in photo mode, until forced landing due to battery depletion. The Intelligent Flight Battery Plus extends flight time to 52 minutes when flying forward at a constant speed of 21.6 km/h. This battery is sold separately and is also included in DJI Lito X1 Combo Fly More Plus (DJI RC 2). In the EU or UK, an extended flight time of 52 minutes is available in accordance with regulations only for DJI Lito X1 Combo Fly More Plus (DJI RC 2) when flying forward at a constant speed of 21.6 km/h. Always consult local laws and regulations before use.

5. Data acquired in an outdoor interference-free environment with IC compliance. The above data shows the maximum communication distance for one-way flights, without return. Always pay attention to RTH notifications in the DJI Fly app during flight.

6. Standard video recording supports up to 4K/60fps HDR, while slow motion video recording supports up to 4K/100fps.

7. The 14-stop dynamic range is available for shooting in Auto mode, but not for slow motion videos or 2.7K at 48/50/60fps vertical videos.

8. Conditions for storing flight paths: the front, back, left, right, or top of the drone are near surfaces with defined texture and illumination greater than 10 lux. Similarly, the ground below is discernible and has diffuse reflectivity greater than 20% (such as walls, trees, or people), even in illumination greater than 10 lux. For balcony takeoff, ensure at least 2 × 2 meters of space and a height less than 30 meters from the ground for safe return home. If the drone reaches its altitude limit during obstacle avoidance, it will hover at that height.