The DJI AL1 Spotlight supports two modes: always-on and strobe. It can clearly illuminate subjects even at a distance of 100 meters. [1] Additionally, it can intelligently connect with the gimbal, following the camera's movements to ensure the illuminated area matches the camera's view. It also offers a wide field of view illumination mode, which can illuminate a wider area when the wide-angle mode is active. The spotlight and speaker can be used independently or together, to adapt to the needs of multiple operational scenarios.
The spotlight supports two modes: always-on and strobe, for clear illumination of subjects. It also connects to the gimbal.
1. Tighten the screws to ensure secure installation. When installing on the aircraft for long-term use, use the supplied Allen wrench to re-tighten the screws after installation.
2. Activate the spotlight by following the app instructions after installation. If a firmware update is available, update to the latest version immediately.
3. The performance of the DJI Matrice 4 Series aircraft's propulsion and vision system will be affected after installing the reflector. Fly with caution.
4. DO NOT point the spotlight directly at the human eye.
5. The reflector may become hot after prolonged use. Be careful of the risk of burns.
Reflector × 1
Replacement screw × 2
Allen key × 1
Weight: 99g (bracket included）
Approx. 91g (excluding bracket)
95×164×30 mm (L×W×H, including bracket)
79×164×28 mm (L×W×H, excluding bracket)
Maximum power: 32W
Illumination: 4.3±0.2 lux at 100 meters, 17±0.2 lux at 50 meters
Effective illumination angle: 23°(relative illumination 10%)
Effective illumination area: 1,300 square meters at 100 meters (10% relative illumination, normal mode)
2,200 square meters at 100 meters (10% relative illumination, wide field of view mode)
Modes: Always on and strobe
Stabilizer mechanical range (tilt): -135° to 45°
Stabilizer controllable range (tilt): -90° to 35°
Maximum control speed (tilt): 120°/s
Stabilizer alignment accuracy: ±0.1°
Operating Temperature: -4°F to 122°F (-20°C to 50°C)
Mounting method: Hand-tightened quick release screws
Support for use on DJI Matrice 4 series aircraft.
