Bambu Lab A1
Bambu Lab A1
Couldn't load pickup availability
Product features
- Fully automatic calibration
- Multicolor printing (combined version)
- Active flow compensation
- 1 clip, quick replacement nozzle
- Active engine noise cancellation
- Print volume 256*256*256 mm³
- The upgraded piano cable features Kevlar reinforcement, thicker insulation, softer copper, optimized wire wrap interval, nylon sheath, and an extended strain relief.
Combo Bambu Lab A1
- Multicolored print
- Fully automatic calibration
- Active flow compensation
- 1 clip, quick replacement nozzle
- Active engine noise cancellation
- Print volume 256*256*256 mm³
Multicolored print
The all-new AMS lite is elegant, reliable and makes multicolor 3D printing accessible to everyone.
Active flow compensation
A1 revolutionizes flow control in 3D printing. It uses a high resolution and frequency sensor to measure the pressure in the nozzle. Based on the sampling, our algorithm actively compensates the flow to extrude accurately.
Fully automatic calibration
A1 manages the various calibrations on its own. Automatically and meticulously calibrate Z offset, bed leveling, vibration resonance and nozzle pressure for EVERY print job.
Quick replacement nozzle
New hotend design for quick replacement, inserts and removes with 1 clip.
Active engine noise cancellation
A1 is able to calibrate the parameters to adapt them to the slightest individual differences of each engine. This compensates for unwanted engine noise.
Bed Slinger, with the same speed and quality as a CoreXY
All-metal rails, rigid chassis, nozzle pressure sensor, accelerometers, powerful MCU and, above all, an advanced motion control system. With these features it is possible to print a benchy following all the quality and speed rules in 14 minutes, directly out of the box and without using specialized filaments.
Synchronization with Bambu Studio and Bambu Handy
Remote control and monitoring of the printer from Bambu Studio or Bambu Handy. Thanks to the integrated camera, you can record timelapse videos.
Technical specifications A1
| Item | Specifications A1 | |
| Body | Print Volume(W*D*H) | 256*256*256 mm³ |
| Print head | Hot End | All metal |
| Nozzle | Stainless steel | |
| Maximum Hot End temperature | 300°C | |
| Nozzle diameter | 0.4 mm (inclusive) 0.2mm, 0.6mm, 0.8mm |
|
| Heated Floor | Print plate | Bamboo Textured PEI Plate (Included) or Bambu High Temperature (smooth PEI) Bambu Cool Plate |
| Maximum floor temperature | 100°C | |
| Speed | Maximum print head speed | 500mm/s |
| Maximum print head acceleration | 10m/s² | |
| Supported Filaments | PLA, PETG, TPU, PVA | Ideal |
| ABS, ASA, PC, PA, PET, Carbon/Fibreglass reinforced polymers |
Not recommended | |
| Sensors | Internal monitoring camera | Low framerate camera (Up to 1080P) Timelapse Supported |
| End of filament sensor | Yes | |
| Filament odometer | Yes | |
| Recovery after power failure | Yes | |
| Filament tangle sensor | Yes | |
| Physical Dimensions | A1: 385*410*430 mm³, Package Size: 552*532*320 mm³, Net Weight 8.3 kg, Gross Weight 11.7 kg Package Size 546*536*420 mm³, Gross Weight (including AMS lite) 14.3 kg |
|
Spedizione e Garanzia
Spedizione e Garanzia
Tutti i prodotti disponibili a magazzino saranno consegnati con una tempistica media di 24/48 ore.
Garanzia Italia con supporto di consulenza dedicato, contattaci!
