Pro3dure GR-13.3 3D Resin for Orthodontic Models with Integrated Release Effect

Description

The resin printodent® GR-13.3 model release Pro3dure is a photopolymerizable resin for the additive manufacturing of orthodontic dental models with integrated release effect , eliminating the need for additional separating agents when using two-component powder/liquid resins.

Thanks to his low viscosity (50 mPa s), parts printed with GR-13.3 model release are easy to clean and post-processing is efficient and fast. The product is intended for professional use by dentists and dental technicians only. not for direct use on patients .

Available in opaque white (REF: D1000372) in 1 kg pack.

COMPATIBLE WITH DLP/LCD/SLA 3D PRINTERS

GR-13.3 model release 3D resin for orthodontic models

3D resin GR-13.3 model release Pro3dure is a resin for generative manufacturing of orthodontic dental models with integrated detachment effect , based on image projection systems (≤ 405 nm).

The formulation is optimised to ensure a stable and constant separating effect without the addition of waxes or fillers that could segregate and cause unstable structures or defective components. The material can be used for construction processes with thick layers from 50 to 100 μm .

Main advantages:

• ✅ No sealing agent needed — release effect integrated into the resin matrix
• ✅ Low viscosity (50 mPa s) — efficient cleaning and post-processing
• ✅ Compatible with numerous two-component orthodontic powder/liquid systems (bond strength < 15 N per ISO 22112)
• ✅ Compatible with CAD software (e.g. exocad) and Pro3dure post-curing hardware (CD-1, CD-2)
• ✅ Compatible with printers DLP / LCD / SLA (≤ 405 nm)

Specifications

* data from representative sample in Pro3dure internal quality control — ** according to internal design specifications and requirements

Instructions for use

The bottles of GR-13.3 model release resin must be Shake well before use .

Make sure the resin is at the appropriate operating temperature. If possible, always keep a bottle in the lab to avoid temperature differences during refilling.

Carefully pour the resin into the projection unit's vat. Bubbles can be removed with a clean spatula or by gently swirling the resin. Due to the low viscosity of GR-13.3 resin, it can be filtered and stirred regularly; let the resin sit for a while. 1 hour before use to avoid bubbles.

Once the building process is finished:

1. Prepare the data (CAD & build preparation)
2. Choose the parameters process (build style, etc.)
3. Transfer data to the 3D printer
4. Prepare the print — shake the bottle
5. Fill the tray of the device resin
6. Start printing and build the components
7. Parts cleaning : IPA ≥ 97% or equivalent agent — approx. 4 min. in an ultrasonic bath (pre-cleaning is recommended)
8. Drying : until there are no IPA residues
9. Post-curing (4 min.) : Inert atmosphere recommended — use a suitable light-curing device (e.g. CD-1, CD-2 from pro3dure medical)
10. Finishing of parts : according to further uses (e.g. insulation, blocking out, etc.)

Important

To avoid harmful effects on the quality of the material, never expose the liquid material to irradiation .

Deviations from the manufacturing process described may lead to different mechanical and optical properties of the GR-13.3 model release resin.

Ensure the use of personal protective equipment during processing: butyl rubber gloves (EN ISO 374), goggles with side protection, protective clothing.

Caution : Cured resins are chemically resistant — avoid staining clothing!

Avoid contact with skin and eyes. In case of accidental contact, rinse with plenty of running water; if necessary, consult a doctor. batch number and the expiration date are indicated on each package — do not use the product after the expiry date.

CLP Classification (EC Reg. 1272/2008) : Skin Irrit. 2 (H315), Eye Irrit. 2 (H319), Skin Sens. 1 (H317), STOT SE 3 (H335).