Elegoo Standard 405nm UV Resin (1 kg) – Black, Grey, Beige

Achieve 3D prints with impeccable definition using the Elegoo Standard UV Resin line. Specifically developed for 405nm wavelength LCD, MSLA, and DLP 3D printers, this photopolymer resin offers the perfect balance of high precision, rapid curing times, dimensional stability, and high mechanical strength.

Available in key colors for all printing and post-processing needs, it is the ideal choice for both experienced hobbyists and prototyping labs.

Key Advantages

• Maximum Definition and Low Shrinkage: The advanced chemical formulation minimizes volumetric shrinkage during UV curing, ensuring parts are dimensionally faithful to the CAD model, with sharp edges and no deformation.
• High Fluidity and Print Speed: Thanks to its low viscosity, the resin flows easily on the FEP/PFA film, allowing for smooth detachment from the build plate and reduced exposure times per layer.
• Low Odor: Optimized formulation to reduce unpleasant odor emissions during processing compared to traditional 3D printing resins.
• SMOOTH Finish and Paint-Ready: Captures even micro-surface details, providing a uniform base that is easy to sand or paint.
• Universal Compatibility: Perfect for the entire Elegoo printer range (Mars, Saturn, Jupiter) and fully compatible with the main MSLA/LCD 3D printers on the market (Anycubic, Phrozen, Creality, etc.).

Color Variant Selection Guide

• Grey: The classic of 3D resin printing. It offers the best visual contrast for identifying details and imperfections. Ideal for general prototyping, miniatures for painting, and mechanical models.
• Black: Perfect for structural components, design objects, dark miniatures, and opaque parts where an elegant, deep look and light shielding are required.
• Beige: "Skin-tone" shade. Essential for creating figurines, anatomical busts, characters, and human miniatures where a warm, natural base is needed.

Unified Technical Specifications

Practical Tips for Use

1. Always shake: Shake the bottle vigorously for 1-2 minutes before pouring the content into the vat.
2. Washing: Clean printed parts in high-purity (≥95%) Isopropyl Alcohol (IPA) for 2-3 minutes to remove resin residue.
3. Final Curing: Expose the part to a 405nm UV source for 2-5 minutes to allow the material to reach its nominal mechanical properties.
4. Safety: Always work in ventilated areas wearing nitrile gloves and protective eyewear.