CREALITY SPACE PLUS DRYER FILAMENTS

Wet 3D printing filament can cause stringing, clogging, poor adhesion, and layer shifting. Creality Spcae Pi Filament Dryer Plus solves these problems by drying the filament during the printing process itself, improving the quality of the 3D model and minimizing the influence of external environmental factors on 3D filament printing.

• Two roll capacity, double drying
• Adjustable temperature 45-70
• Real-time humidity and temperature monitoring
• Drying time setting 0-48 hours
• 360° hot air heating
• One key set for 12 filaments

Wet 3D printing filament can cause stringing, clogging, poor adhesion, and layer shifting. Creality Spcae Pi Filament Dryer Plus solves these problems by drying the filament during the printing process itself, improving the quality of the 3D model and minimizing the influence of external environmental factors on 3D filament printing.

Two roll capacity design

It holds 2 rolls of 1kg filament and is also equipped with 4 filament holes and PTFE tubes to meet the needs of users drying a wide range of filaments and 2 printers at the same time.

Double PTC 360° hot air heating

The dryer heats up quickly with a built-in fan, circulating hot air 360° for even heating, effectively drying wet filaments and improving printing results.

Advanced PTC heating technology

The Space Pi Filament Dryer Plus uses a unique 110W PTC heater to heat the space, a feature that sets us apart in the market. Unlike most filament dryers that use a PI heating pad and often result in uneven drying, this PTC heater model ensures even drying. This PTC heater is not only durable and energy-saving, but also eco-friendly.

LCD touchscreen

The Creality Space Pi Plus Filament Dryer features a 4-inch touch screen for easy use, making it easy to monitor drying conditions.

One key set for 12 filaments

It features one-key temperature settings for different filament types, supporting up to 12 filament types, including common and high-performance composites such as PLA-CF, PA, ASA. Of course, you can also freely adjust the temperature between 45°C and 70°C.

48 hour timer function

The heating duration can be set freely from 0 to 48 hours, allowing the filaments to dry completely for better printing results.

Parameter Power off memory function

After a power outage, the machine can restart and still remember the previous material and temperature settings, eliminating the need for resetting and allowing for quick drying.

Specifications: