ANYCUBIC WASH & CURE 3 PLUS

Wash & Cure 3 Plus by Anycubic is the perfect 2-in-1 solution for post-processing finished printed resin models. The powerful device with a cleaning capacity of 7.6 liters is the perfect complement for LCD 3D printers with a size of 10.6 inches or smaller.

• Size upgrade 7.6 liters Curing dimensions 228 x 128 x 260 mm
• Improved polymerization increases energy value by 30,000 uW/cm thanks to gooseneck lights
• IPA Savings Dual layer curing platform
  
  

  

  Size upgrade, capacity increase

  Compared with Anycubic Wash & Cure Plus, the wash volume of the wash basket is increased by about 13.4% to 7.6 liters, and the total volume of the wash bucket is 12 liters, suitable for 10L light-curing 3D printers .6 inches and under.

  
  

  At the same time, the curing size has increased by 42%, up to φ220*260 millimeters, to accommodate increasingly larger models for a single post-processing session.

  

  Improved overall and partial polymerization

  The innovative design of the Flexicure gooseneck lights increases the energy value by 30,000uW/cm²* in the irradiation range of 1~3cm, greatly improving the curing effect on details such as the model's top and skirt of the figure.

  
  

  Anycubic Wash & Cure 3 Plus features a brand new arrangement of lambskin beads combined with a lens light source. Compared to the previous generation Anycubic Wash & Cure Plus, it offers a 20% improvement in curing uniformity*. This results in a deeper and more complete overall polymerization of the model, ensuring better quality and consistency.

  

  Double layer design, IPA saving

  The double-layer PP material cleaning basket supports washing with the platform. It features two adjustable heights of 150 millimeters and 250 millimeters, allowing for build platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.

  
  

  A brand new dual-layer curing platform has been adopted, which increases the number of cured patterns per cycle and greatly improves the curing efficiency.

  

  Simple, silent and efficient operation

  Dual cleaning and curing modes, easily selectable with one click; Gooseneck advanced light curing mode can be easily turned on and off with one click. The cleaning and curing time can be easily adjusted from 1 to 30 minutes as desired.

  
  

  Thanks to a more sealed structural design and software optimization, noise interference generated during cleaning and drying is reduced[1], creating a quieter and more comfortable working environment.

  

  In the box