An NFC tag that opens your XYZprinting FDM 3D printer to materials from different brands.

From now on, Open Smart Tag from XYZprinting allows you to use filaments from other manufacturers (so-called third-party suppliers) in your XYZprinting FDM 3D printer (e.g. da Vinci Mini w) . This is the alternative to filament resetters, which in the worst case can make the motherboard of your XYZprinting 3D printer unusable.

Attention: Color models in combination with the da Vinci Color series can still only be printed with ORIGINAL XYZprinting Color-Inkjet PLA.

Compatibility

XYZPrinting da Vinci Nano series

• da Vinci Nano
• da Vinci Nano W

XYZPrinting da Vinci miniseries

• da Vinci Mini Maker
• da Vinci Mini W
• da Vinci MiniW+

XYZPrinting da Vinci Jr. series

• da Vinci Jr. 1.0
• da Vinci Jr. 1.0w
• da Vinci Jr. 1.0 3in1

XYZPrinting from Color Series

• da VinciColor mini
• Da Vinci color
• da Vinci Color AIO

not suitable for the following models:

• da Vinci 1.0A (*1)
• da Vinci 1.1 plus (*1)
• da Vinci 1.0 AIO (*1)
• da Vinci 1.0A Duo (*1)
• da Vinci Jr. 2.0Mix

(*1) open filament support possible via firmware update

Dimensions

Compatible spool size, otherwise you need to use an external spool holder (see user manual):

• Internal diameter: 50mm
• Width: maximum 53 mm

Suggestions

1. Once registered, the tag cannot be changed on other printers.
2. Print quality cannot be guaranteed when using other brands of filament.
3. The warranty does not cover stuck filaments, product failures, damage or defects caused by the use of other brands of filaments or third-party cutting software.