PrimaCreator Value Jewelery Casting Pro Resin is an affordable, high-quality casting resin that is super easy to use thanks to its high wax content. This means there is no need for expensive plaster materials and casting equipment shrinkage and its ability to reproduce super fine detail.

Characteristics:

• Optimized for UV 395 – 405 nm light source
• Fast curing time, 6-8 seconds per layer (depending on color) for faster prints. (monochrome LCD)
• When you're done 3D printing, clean the print with IPA (isopropyl alcohol) or PrimaCreator Resin Cleaner to rinse off any excess resin left behind
• PrimaValue resins work on several 3D printers
• When it's time to cure, you can use sunlight or a UV curing chamber.

PrimaCreator Value Jewelery Casting Pro - 1 kg

PrimaCreator Value Jewelery Casting Pro Resin is an affordable, high-quality casting resin that is super easy to use thanks to its high wax content. This means there is no need for expensive plaster materials and casting equipment shrinkage and its ability to reproduce super fine detail.

Not only can it reproduce super fine details, but it can also reproduce very thick parts, without the risk of cracks during curing and drying. It is also compatible with DLP and LCD resins. Tests have shown that DLP printers tend to perform better due to the higher wax content, but we saw great results on both ends.

Some examples/use cases include batch printing of rings, earrings, and test tubes. Costume jewellery, wedding rings.

The resin is suitable for use on LCD, mono LCD and DLP 3D printers using a 395-405 nm light source. Many popular printers include the Photon Mono series, the new Photon M3 series, and the Halot series from Creality 3D. The compatibility doesn't stop there, the resin is also designed to be used with many other machines, including but not limited to: Phrozen, Zortrax, Wanhao, SparkMarker, Nova3D and more!

3D Print Settings:

• Optimized for UV 395 – 405 nm light source
• Fast curing time, 6-8 seconds per layer (depending on color) for faster prints. (monochrome LCD)
• When you're done 3D printing, clean the print with IPA (isopropyl alcohol) or PrimaCreator Resin Cleaner to rinse off any excess resin left behind
• PrimaValue resins work on several 3D printers
• When it's time to cure, you can use sunlight or a UV curing chamber.

Depending on the 3D print, curing times may vary:

• In a curing chamber with UV light, it will take about 2-5 minutes
• In sunlight, 10-20 minutes
• In daylight on a cloudy day, it can take up to 60 minutes
• When you want amazing results at a lower cost than many other brands, PrimaCreator VALUE resin should be your first choice!