CREATBOT F430 - 420°C VERSION - Used
CREATBOT F430 - 420°C VERSION - Used
Pickup available at Sede Operativa
Usually ready in 24 hours
Products in excellent condition and fully functional.
USED
ONLY 100 HOURS OF PRINTING
CreatBot F430 is a low-cost high-temperature 3D printer for additive manufacturing with PEEK filament and other high-performance materials that require high extrusion temperatures. Use it to process industrial filament with an extruder temperature of up to 420 °C and a maximum installation space temperature of 70 °C.
CreatBot F430 System Features:
- Heated installation space reduces deformation
- Full metal hot end
- The hot end can be heated up to 420°C
- High manufacturing precision
- Full metal case
- Large installation space: 40 x 30 x 30 cm
- Power failure backup to easily resume your 3D prints
- Filament sensor for state detection
- Glass-ceramic print bed for beautifully smooth undersides
- Simple and intuitive operation via touchscreen
- Direct extruder drive
- Automatic leveling and adjustment of the building platform
- Completely enclosed installation space
- Air filter system for clean room air
High Temperature 3D Printer - With 420°C Hotend
CreatBot is one of the first manufacturers to launch truly affordable 420°C high temperature 3D printers. The CreatBot F430 features a dual extruder. The dual extruder enables 3D printing with a variety of different filaments. It produces parts with a wide range of material properties. To optimize your 3D printing results, you can fine-tune the nozzle and select the perfect setting.
High precision and impressive production speed
Benefit from a precise industrial extruder guide system. With this you can produce super precise and exact components. During the entire additive manufacturing process, the extruder runs smoothly and very evenly. The highest production accuracy is up to 0.04 mm. 3D print and extrude filament with the CreatBot F430 smoothly and with minimal nozzle clogging.
Accuracy up to: 0.04 mm
Speed up to: 120 mm/s
Solid metal frame provides stability
Use this high temperature 3D printer for many years. The solid metal structure of CreatBot F430 greatly extends its lifespan. The optimization and cooperation of all system components ensure sustainable and efficient operation. The first series of CreatBot 3D printers have been working reliably for over 5 years and over 8000 hours.
Fully enclosed high temperature build chamber
Thanks to the completely enclosed installation space, it is also possible to process materials that have a strong tendency to warp (ABS, nylon, PC, PP, ...). The closed high-temperature construction chamber keeps all external influences away, the temperature of the chamber is constant and significantly reduces noise. The sealed hot chamber ensures a constant room temperature so that the model does not deform during 3D printing.
Power failure recovery and filament detection
In case of power failure, this 3D printer automatically memorizes the current position and production progress. It also lowers the building platform and retracts the filament. After the recurring flow, you can simply resume 3D printing.
With CreatBot F430 your 3D prints succeed easily and without headaches: save time, costs and nerves thanks to intelligent functions.
Glass ceramic platform for uniform surfaces
This 3D printer has a glass ceramic build platform. It 3D prints smooth surfaces with good adhesion on the build platform. The ceramic surface is very suitable for applying adhesives. Thanks to the good heat transfer, you also save energy by efficiently heating the build platform. If you want, you can turn off the build platform heating after a few 3D printed layers.
Automatic leveling platform for perfect surfaces
CreatBot F430 uses 25 points to correctly adjust the build platform. A sensor measures the distance between the extruder nozzle and the build platform. Later in the additive manufacturing process, the F430 uses the information to extrude material of different strengths and build a flat surface for 3D printing. So your objects have a clean and flat surface. This ensures optimal generative manufacturing results from the first layer.
PEEK Filament and Application
The standard F430s can perfectly process PLA, ABS, Nylon, etc. Now comes the F430 - PEEK-3D printer 420 ° C from CreatBot. PEEK filament requires an extrusion temperature of 420 ° C and the new F430 delivers! PEEK material is characterized by high strength, toughness, corrosion resistance and wear resistance. Use PEEK in aerospace, electrical, medical, engineering, automotive and other applications. With the F430 - 420 ° C you also benefit from the fascinating possibilities of this high-tech material.
Buy the CreatBot F430 low-cost high-temperature 3D printer for additive manufacturing of PEEK filament and other high-tech filaments.
| Construction an Technical Details | |
| Usable Nozzle Type | MK8 |
| Usable Filament Diameter | 1.75mm |
| Nozzle Max Temperature | 420°C |
| Open Filament System | Yes |
| Extruder Type | direct drive |
| Max Printing Speed | 180 mm/s (depends on material) |
| Build Area | 300mm x 400mm x 300mm |
| Dual Build Area | 300mm x 400mm x 300mm |
| Heated Build Plate | Yes |
| Build Plate Temperature Max | 140 ºC |
| Build Plate Surface | carbon fiber sheet, removable |
| Build Plate Material | pyroceram glass |
| Build Plate Attachment | fixed |
| Build Plate Leveling System | BL Touch |
| Build Chamber During Process | Open or Closed |
| Build Chamber Heated | Yes, max 70°C |
| Filament Chamber Closed | Yes |
| Extruder Number | 2 |
| Extruder Construction Type Dual | Dual Head fixed height, manual adjustable |
| Installation Space / Requirements | |
| Total Mass | 485mm x 620mm x 680mm |
| Total Weight | 48 kg |
| Operating Ambient Temperature | 15°C - 32°C |
| Power Consumption Max | 1500W |
| Voltage | AC: 100V - 230V (50-60Hz) |
| Equipment | |
| Hepa Filter | Yes |
| Filament Runout Sensor | Yes |
| Power Loss Fail Safe | Yes |
| Touch screen | Yes |
| Connection | |
| USB | Yes, USB 2.0 |
| Accuracy | |
| LayerHeight | 0.02mm - 0.5mm |
| Resolution | 0.04mm |
| Shipping | |
| Shipping Box | 580mm x 750mm x 720mm |
| Shipping Weight | 62 kg |
Shipping and Warranty
Shipping and Warranty
All products available in stock will be delivered with an average timing of 24/48 hours.
Italy warranty with dedicated consulting support, contact us!
-
Free shipping, return in 14 days *.
DisclosureFree express shipping for orders over € 499.
* For return terms and conditions, please visit our returns and refunds policy.
-
-
Are you a professional or a company?
Contact usYou can ask us for an invoice for your purchases! All the prices of our products already include VAT.
-
Do you have the teacher's card?
Contact usProceed with checkout and select "Teacher's Card" as the payment method. Requests?
