The Snapmaker Dual Extrusion module opens up new possibilities for your creativity, making it possible to print two different materials or colors at the same time. The module is compatible with Snapmaker 2.0 A350/F350/A250T/A250/F250/A150.

Characteristics:

• 3s hot end switch
• Double extrusion at 300°C
• Soluble and separable supports
• Advanced Materials Printing
• 4-fan cooling system
• Compatibility with different sized nozzles
• Automatic leveling
• Smart Work Recovery

Snapmaker dual extrusion module

The Snapmaker Dual Extrusion Module opens up new possibilities for your creativity, making it possible to print two different materials or colors at the same time. The module is compatible with Snapmaker 2.0 A350/F350/A250T/A250/F250/A150.

Combine materials

The module allows double extrusion and simultaneous processing of two different materials: for example, it is possible to combine PLA and TPU. Especially when support structures are needed, the Dual Extrusion module comes in handy. This is why the module works excellently with water-soluble PVA filament and leaves high-quality prints. The same goes for HIPS in combination with brittle PLA: you can use a little oil to remove it more easily, but it's not necessary.

Multi-color print

Most 3D models are printed in a single color, but they come to life thanks to the different properties of the filaments such as gloss, transparency, glitter or similar. With the dual extrusion module you can now take your creativity to a new level and print in multiple colors! This will create more depth, movement and of course uniqueness!

All the gears and ideas

The 7.5:1 planetary gearing transmits power from the motor with much greater torque, which allows us to use relatively small motors to achieve the necessary pulling force. The reduction of unnecessary weight will in turn result in much less vibration of the tool head at the same acceleration rate, thus maintaining the same printing accuracy as the single extrusion module.

Switching hotends with a motor

Switching between hotends is typically a rather time-consuming process on dual-extrusion printers. Especially when you consider that there are two hotends on one tool head! The Snapmaker module comes in handy here as it features an electronically controlled 3s-Hotend-Switch. This switches with a motor, as follows: If the G-code tells you that the hotend needs to be changed, the motor asks the linear guide to do the heavy lifting. The hotend is replaced and printing resumes within 3 seconds, with a repeatability of 0.012 mm.

4-fan cooling system

Filament residue on a clogged nozzle is horrible! This problem should be solved with the Dual Extrusion Module since each hotend comes with its own special fan. The fan ensures that the filament does not melt too early in the heatsink and thus clog the hotend. In addition to the hotend fans, the module has two more fans (left and right) for cooling the prints.

Get smart with various nozzle sizes

To use nozzles more intelligently, you can slightly optimize the settings with each nozzle size in Luban. If you want a print with impeccable details, print the shell at a slower speed with the 0.2mm nozzle hotend, so it is not only sturdy but also looks great on the outside. And if you want speed for a model with a lot of support structure, print the infill with a 0.6 or 0.8 mm nozzle hot end, because they are much faster.

Automatic leveling

Don't worry if you lose your calibration card because it is no longer needed. On your heated bed, from the first to the last point, the proximity sensor in the module captures data for each of them and it will be automatically processed by the controller. You don't even need to worry about Z-height calibration. The optoelectronic switch will do it for you.

Recovery from power loss and filament exhaustion

In case you were wondering, the dual extrusion module also supports power loss and filament run out recovery. Follow the touchscreen and all sorts of things will go well.