Characteristics

• All filaments, one nozzle
• Extreme durability
• Perfect for highly abrasive filaments such as carbon, glow in the dark fibers, glass fibers, metal, wood.
• Perfect diameter without jagged edges for better print quality

The PrimaCreator Ruby nozzle is the latest addition to the PrimaCreator nozzle range.

A regular brass nozzle is often recommended because it has a higher conductivity when it comes to heat. But a brass nozzle has its drawbacks. If you want to print with an abrasive material like carbon or glow in the dark filament, a regular brass nozzle will wear out in no time. That is why you can choose to use a hardened steel nozzle, it will not wear out as fast as a brass nozzle but it is made of steel and as a material it is not optimized to be used as an "everyday nozzle" due to the fact that the thermal conductivity is not as good as a brass nozzle.

The most logical solution would be to have the best of both worlds.

This is where PrimaCreator's Ruby nozzle comes into play.

In the best nozzle we have ever produced we have the same high quality brass as our regular nozzles, but on top of that we have also added a small ruby ​​gemstone to the tip of the nozzle. This turns a regular brass nozzle into a nozzle that you can use with your standard filament like PLA, ABS, PETG and so on up to the more abrasive ones like carbon filled filament, metal, glow in the dark, wood , well, most of the types of “nozzle killer filament” you can think of that are currently on the market.

Finally, you can use a single nozzle for all your materials.

All PrimaCreator Ruby Nozzles are made from the finest premium brass with a genuine Ruby tip . They are completed in a state-of-the-art factory. All nozzles are made to a tolerance of less than ±0.01mm. This means your filament will have a very smooth and clear surface during extrusion, which of course results in better prints.

For best results and print quality, we strongly recommend re-leveling the build plate after replacing the nozzle. Note that a Prima Creator nozzle may be compatible with your printer, but the distance between the nozzle and the build plate needs to be adjusted.

The manufacturing process of a Prima Creator nozzle starts with a selected high-quality material. When the material reaches the factory, an optical inspection is first performed on the material that will be used for each batch of nozzles. Then it is time to block the material, in other words, to make it into a long rod. In our process this is done only once, in many other (cheaper) cases, this process has to be repeated several times, often up to 3-4 times and still not achieving the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected from surface oxidation.

The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.

The process of removing sharp edges from the nozzles is a very important step as it is an important part of the result. If there are too many sharp edges left on the nozzle, it will be more prone to clogging. Therefore, it is essential that the nozzle is very smooth and clean before being used. In each batch, a few nozzles are selected and cut in half to ensure that all specifications are met and the surface is in perfect condition.

The nozzles are then checked one last time and individually packed in a protective box, ready for shipment.

The PrimaCreator Ruby Nozzle is the perfect choice for those who want only the best at a great price!

Why should I use a ruby ​​nozzle?

• All filaments, one nozzle
• Extreme durability
• Perfect for highly abrasive filaments such as carbon, glow in the dark fibers, glass fibers, metal, wood.
• Perfect diameter without jagged edges for better print quality