Ultrafuse PP GF30 is polypropylene reinforced with 30% glass fiber. The fibers of this compound are specially designed for 3D printing filaments and are compatible with a wide range.

Characteristics :

• Excellent chemical resistance
• Low density
• Low moisture absorption
• High heat resistance
• Improved UV resistance

PPGF30 ultrafuse

Ultrafuse PP GF30 contains 30% specialty glass fibers designed for filament manufacturing and 3D printing, so Ultrafuse PP GF30 is compatible with any standard FFF printer. PP has lower moisture absorption than PA. Combined with its high level of glass fiber reinforcement and its excellent chemical resistance, Ultrafuse PP GF30 is the filament of choice for exceptional working environments. Thanks to its resistance to UV rays it is more suitable than any other PP-based filament for applications exposed directly to sunlight.

Tips and Tricks:

• Nozzle temperature; 240-260°C
• Bed temperature; 20-40°C
• Change bed; PP tape or PPGF adhesive
• Drying procedure; Dry the filament at 60°C for at least 5 hours
• Printing speed; 30-80 mm/sec

Material properties

• Tensile Strength (MPa): 41.7 (XY); 15.9 (ZX)
• Flexural modulus (MPa): 3507 (XY); 4026 (XZ); 1671 (ZX)
• Elongation at break: 4.4% (XY); 0.8% (ZX)
• Unnotched Charpy impact strength (kJ/m2): 23.1 (XY); 25.8 (XZ); 2.5 (ZX)
• Izod impact resistance without notch (kJ/m2): 20.5 (XY), 2.4 (XZ); 2.6 (ZX)
• HDT at 0.45 MPa: 127 oC

BASF quality control

The best available raw materials are selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery ensures truly consistent filament, even across colors and batches. It will work as expected every time.

All BASF products are 100% traceable back to the source.