AlphaBot 2 is a robotics development platform that integrates an Arduino compatible programmable module. It has many features including line tracking, ultrasonic sensor to avoid obstacles, infrared remote control, Bluetooth communication, etc. Thanks to the design, assembly is particularly simple and fast, without soldering or complicated wiring. After a few minutes dedicated to assembly, you can download the demo source codes and test the robot's functionality.

All the supplied electronics can be managed with 5V logic levels, with the exception of the OLED display which requires 3.3V communication logic, therefore if you also want to use the display, the Arduino board used must be able to work at 3.3V logic.

AlphaBot 2 is composed of two overlapping sections, AlphaBot2–base and AlphaBot2-ar

AlphaBot2-Base , represents the lower frame

1. AlphaBot2 control interface: Connector for connection to the top board (cable included)
2. Connector for connecting ultrasonic module (Module included)
3. Obstacle avoidance indicators
4. Multi-directional movement sphere
5. ST188: Infrared sensors for obstacle avoidance
6. ITR20001/T: Infrared sensors for line tracking
7. Potentiometer to adjust the distance of obstacles
8. TB6612FNG Motor Driver
9. LM393 Voltage Comparator
10. N20 gearmotors 1:30, 6V/600RPM
11. Rubber wheels diameter 42mm, width 19mm
12. Power switch
13. Battery holder: supports two 14500
14. WS2812B: RGB LED
15. Power indicator

AlphaBot2-Ar , represents the upper frame

1. AlphaBot2 control interface: Connector for connection to the bottom board (cable included)
2. Arduino expansion header: to connect any Arduino shields
3. Arduino interface: to connect UNO programming module (included)
4. Xbee connector: to connect the Bluetooth module and control the robot via BT (not included 2850-DUALBLUETOOTH )
5. IR receiver
6. PC8574: I/O expander, SPI interface
7. Arduino peripheral jumpers
8. TLC1543: 10-bit AD acquisition chip
9. Buzzer
10. 0.96inch OLED SSD1306 driver, 128×64 resolution
11. Joystick

The package includes: AlphaBot2-base board, AlphaBot2-ar board, ultrasonic sensor, USB cable, flat cable for connecting the two boards, UNO programmable module, infrared remote control, screws and spacers.