Post-print coating for smoothing and finishing 3D Prints. It guarantees a glossy, uniform and resistant coating already with the first application.

It can be colored with coloring pastes or metallic powders or used transparent.

Excellent adhesion and reinforcement on PLA, LAYWOOD, ABS.

• Odorless;
• Quick ;
• Resistant;
• Sandable;
• Shiny;
• High UV resistance,
• Excellent mechanical resistance,

Applied to any print, it makes the treated surface shiny, smooth and shock-resistant.

Developed specifically for application in the 3D sector, it does not drip and does not cover small details, faithfully respecting all the shapes of the print.

• Eliminate irregularities between different layers;
• Shiny;
• Strengthens the mechanical resistance of the print;
• Sandable and paintable.

+ Employment ratio 100:45;

+ For a surface of 200 cm2, only 25g are needed

Hardening speed

At a temperature of 20°C it is solid in 3 hours

At a temperature of 30°C it is solid in 2 hours

The rate of hardening can be further accelerated by holding the piece near a heat source.

Viscosity and Processing Times

Viscosity at 900 cps (25°C)

Working time (15g) at 20 min (20°C)

Working time (15g) at 10 min (30°C)

Fast and Effective, it is proposed as an Easy Application solution to accelerate the production of finished products through 3D printing, increasing their aesthetic homogeneity and impact resistance.

Its high mechanical resistance also makes it ideal as a glue between prints or for repairing damaged 3D artefacts .