ANYCUBIC WASH & CURE 3 PLUS

Anycubic Wash & Cure 3 Plus is the perfect 2-in-1 solution for post-processing finished printed resin models. The powerful device with a cleaning capacity of 7.6 liters is the perfect complement for LCD 3D printers with a size of 10.6 inches or smaller.

Characteristics:

• Size upgrade 7.6 liters Curing dimensions 228 x 128 x 260 mm
• Improved polymerization increases energy value by 30,000 uW/cm thanks to gooseneck lights
• IPA Savings Double Layer Polymerization Platform

Size upgrade, capacity increase

Compared with Anycubic Wash & Cure Plus, the washing volume of the wash basket is increased by about 13.4% to 7.6L, and the total volume of the wash bucket is 12L, suitable for 10.6 inch and below photocurable 3D printers.

At the same time, the curing size has been increased by 42%, up to φ220*260mm, to accommodate increasingly larger models for a single post-processing session.

Improved overall and partial polymerization

The innovative design of Flexicure gooseneck lights increases the energy value of 30,000uW/cm²* in the irradiation range of 1~3cm, greatly improving the curing effect on details such as the model's top and figure's skirt.

Anycubic Wash & Cure 3 Plus features a brand new arrangement of lamb beads combined with a lens light source. Compared to the previous generation Anycubic Wash & Cure Plus, it offers 20% improvement in curing uniformity*. This results in a more thorough and complete overall polymerization of the model, ensuring better quality and consistency.

Double layer design, IPA saving

The double-layer PP material cleaning basket supports platform washing. It features two adjustable heights of 150mm and 250mm, allowing for print platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.

A brand new double-layer polymerization platform has been adopted, which increases the number of polymerized patterns per cycle and greatly improves the polymerization efficiency.

Simple, quiet and efficient operation

Dual mode of cleaning and curing, easily selectable with one click; The advanced Gooseneck light curing mode can be easily activated and deactivated with one click. The cleaning and curing time can be easily adjusted from 1 to 30 minutes as desired.

Thanks to a more sealed structural design and software optimization, the noise interference generated during cleaning and drying is reduced[1], creating a quieter and more comfortable working environment.

In the box