PrimaSELECT™ Luvocom 3F 9581 PEKK (polyether ether ketone) is a semi-crystalline thermoplastic material. 3D print this high-performance plastic now with your 3D printer. PEKK has high resistance to heat, chemicals and mechanical loads. Therefore, it is used to produce parts for the aerospace, gas, oil, medical and automotive industries.

Material properties PrimaSELECT™ Luvocom 3F 9581 PEKK:

• Specially optimized for industrial 3D printing – Isotropic shrinkage characteristics
• Non-flammable (UL94 V-0) and highly resistant to chemicals
• Continuous service temperature of 255°C – Service temperature 300°C (during life max. 200 hours)
• Low deformation

Buy PEKK 3D printer filament for the highest performance applications

Polyether ketone ketone (PEKK) is a semi-crystalline thermoplastic material. It belongs to the polyaryletherketone family. With high heat and chemical resistance and the ability to withstand high mechanical loads, it is perfect for the production of demanding end-use parts. Furthermore, it is inherently flame retardant and has unique tribological properties.

Material properties PrimaSELECT™ Luvocom 3F 9581 PEKK:

• Specially optimized for industrial 3D printing
• Characteristics of isotropic shrinkage
• Non-flammable (UL94 V-0)
• Continuous service temperature 255°C
• Service temperature 300°C (during service life max. 200 hours)
• Highly chemically resistant
• Low deformation PEKK filament

PEKK is easier to work with than PEEK filament

PEKK filament has an adjustable crystallization rate that allows users of FFF or FDM 3D printers to take advantage of both the extreme performance of PEEK and the easier processing of amorphous materials. PEKK filament is easier to process than traditional PEEK filament and has better layer adhesion. At the same time, it offers material properties of similar strength and toughness and improved dimensional stability. PEKK has a higher glass transition temperature than PEEK of 15ᵒC.

Material properties LUVOCOM® 3F PEKK 50082:

• Density 1.27 g/cm³
• Tensile strength 90 MPa
• Elongation at maximum force 5%
• Modulus of elasticity 3 GPa
• Flexural strength 150 MPa
• Flexural elongation at max. strength 6%
• Flexural modulus 2.5 GPa

PEKK 3D printing with little deformation

LUVOCOM® 3F PEKK 50082 is designed to outperform standard PEKK materials on the market. It features improved flow characteristics that improve processing and layer adhesion. This unique modified pure PEKK offers dimensional stability and can be processed in unheated build chambers, resulting in semi-crystalline parts with little deformation.

3D Print Settings:

• Printing temperature: 340°C (320-360°C
• Bed temperature: 110-140°C
• Printing speed: 20-50mm/s
• Drying instructions: 4 hours, 110°C